Step 4 : Tuning your TV to the VCR

If your TV has a PERITEL connector, see page 19.

If your TV does not have a PERITEL connector

Follow the steps below so that your TV will properly receive the video signals from your VCR.

?/1 REGL CANAL

CHAINE +/–

Started Getting

1

 

Press ?/1 (marche/veille) to turn on the VCR.

 

 

2

REGLAGE AUTO

Press REGL CANAL on the VCR lightly.

 

The factory-preset RF channel appears in the display window.

The VCR signal is output through this channel to the TV.

REGL CANAL

3

 

Turn on your TV and select a programme position for the VCR

 

 

 

 

picture.

 

 

This programme position will now be referred to as the video

4

 

channel.

REGLAGE AUTO

Press REGL CANAL.

 

The TV system appears in the display window.

REGL CANAL

continued

Tuning your TV to the VCR 17