| Symptom | Remedy | |
|
|
| |
| The picture rolls | • Adjust the vertical hold control on the TV or monitor. | |
Playback | vertically during picture |
|
|
search. |
|
| |
|
| ||
The picture has no | • The tape is defective. | ||
sound. | • If you made A/V connections, check the audio cable | ||
|
|
| connection. |
|
|
|
|
| No TV programme | • | Make sure the TV is set to the video channel. If you are |
| appears on the TV |
| using a monitor, set it to video input. |
| screen. | • If your TV is connected to the VCR with both PERITEL | |
|
|
| and aerial cables, make sure the RF channel is set to OFF |
|
|
| |
|
| • Existing broadcasts may interfere with the VCR. Reset the | |
|
|
| RF channel output of your VCR. |
|
| • Select the correct source with the CHOIX ENTREE button. | |
|
|
| Select a programme position when recording TV |
Recording |
|
| programmes; select “L1” or “L2” when recording from |
|
| other equipment. | |
|
| ||
TV reception is poor. | • Make sure the aerial cable is connected securely. | ||
| • Adjust the TV aerial. | ||
| • Make sure NORME (L or B/G) in the REGLAGE DES | ||
|
| ||
|
|
| CHAINES menu is set to the same system used in your |
|
|
| local area. |
|
|
|
|
| The tape starts playing as | • | The safety tab has been removed. To record on this tape, |
| soon as it is inserted. |
| cover the tab hole (see page 43). |
|
|
|
|
| The tape is ejected when | • | The safety tab has been removed. To record on this tape, |
| you press z ENR. |
| cover the tab hole (see page 43). |
|
|
| |
| Nothing happens when | • Make sure the tape is not at its end. | |
| you press z ENR. |
|
|
|
|
| |
| The timer does not | • Check that the clock is set. | |
| operate. | • Make sure a tape has been inserted. | |
|
| • Check that the safety tab has not been removed. | |
recording |
| • Make sure the tape is not at its end. | |
| • Make sure a programme has been set for timer recording. | ||
| • Make sure your timer settings are past the current time. | ||
| • Check that the decoder is turned on. | ||
| • Check that the satellite tuner is turned on. | ||
Timer |
| • The clock stops if the VCR is disconnected from the mains | |
|
| for more than one hour. Reset the clock and timer. | |
| • Turn the power off and unplug the mains lead. | ||
|
| ||
|
|
| |
| The SHOWVIEW menu | • Check that OPTIONS PROGRAMM. in the | |
| or the MINUTERIE |
| menu is set correctly (see page 70). |
| menu does not appear. |
|
|
|
|
|
|
74Troubleshooting