Setting the recording duration time

After you have started recording in the normal way, you can have the VCR stop recording automatically after a specified duration.

Before you start...

Refer to “Index to parts and controls” for button locations.

1While recording, press z ENR.

The indicator appears in the display window.

SP

MAGN OPC

2 Press z ENR repeatedly to set the duration time.

Each press advances the time in increments of 30 minutes.

0:30 1:00 5:30 6:00 Enregistrement normal

The tape counter decreases minute by minute to 0:00, then the VCR stops recording and turns off automatically.

To extend the duration

Press z ENR repeatedly to set a new duration time.

To cancel the duration

Press z ENR repeatedly until the indicator disappears and the VCR returns to the normal recording mode.

To stop recording

To stop the VCR while recording, press x STOP.

Note

You cannot display the current tape time in the display window when setting the recording duration time.

58Setting the recording duration time