5 | CHAINE | Press CHAINE +/– (repeatedly) to select the appropriate TV system |
|
for your area.
Select “L” for the L TV system (SECAM), or “G” for the B/G TV system (PAL).
6 | Tune the TV to the same channel |
|
| shown in the VCR display window so |
|
| that the picture on the right appears | MAGNETOSCOPE SONY |
| clearly on the TV screen. |
|
| Refer to your TV manual for TV |
|
| tuning instructions. |
|
| If you select the wrong TV system in |
|
| step 5, the picture on the right may |
|
|
| |
| not appear. Select the appropriate TV system and tune the TV | |
| again. |
|
| If the picture does not appear clearly, see “To obtain a clear picture | |
| from the VCR” below. |
|
|
|
|
| REGLAGE AUTO Press REGL CANAL. |
|
7
You have now tuned your TV to the VCR. Whenever you want to play a tape, set the TV to the video channel.
REGL CANAL
To check to see if the TV tuning is correct
Set the TV to the video channel and press CHAINE +/– on the VCR. If the TV screen changes to a different programme each time you press CHAINE
To obtain a clear picture from the VCR
If the screen does not appear clearly in step 6 above, go to step 7 to finish this procedure once. Then start again from step 2. After pressing REGL CANAL in step 2, press CHAINE +/– while the RF channel is displayed, so that another RF channel appears. Then tune the TV to the new RF channel so that a clear picture appears.
18Tuning your TV to the VCR