Other Operations
Adjustments Using the SET UP Button
The SET UP button allows you to make the following adjustments.
Adjusting the Control A1 II auto function
Turning on the Control A1 II auto function parameter lets you to turn Sony components connected via Control A1 II cords (see page 6) on automatically when you press the corresponding function button.
Auto function is set to ON by default.
1Press SET UP.
2Press MENU </> to select “AUTO FUNCTION”.
3Press +/– to select
Setting up the 2 way remote
This receiver is shipped from the factory with the 2 way remote control system set to “ON”. Normally, you can use the receiver as is.
However, if you want to use this receiver together with another component that is also compatible with the 2 way remote control system, be sure to perform the following operation to limit response to signals sent from the remote controls.
To use with the
Perform the following steps to turn OFF this unit’s 2 way remote control system. Also, be sure the TA- E9000ES is turned on when using this unit.
To use with other components that have the 
logo
Turn OFF the other component’s 2 way remote control system. For details, refer to the operating instructions supplied with your other components.
To use with CD players
Turn OFF the remote control adaptor switch on the
Also when using several 2 way remote control system components together, be sure to place them close together in order to enable proper remote operation.
1Press SET UP.
2Press MENU </> to select “2WAY SETUP”.
3Press +/– to select “2WAY ON” or “2WAY OFF”.