Sony STR-435, STR-DE535 Unpacking, Hookup Overview, Getting Started, Before you get started, Inserting batteries into the remote

Getting Started

Unpacking

Check that you received the following items with the receiver:

•FM wire antenna (1)

•AM loop antenna (1)

•Remote commander (remote) (1)

ModelRemote

STR-DE535 RM-LJ302

STR-DE435 RM-PP402

•LR6 (size-AA) batteries (3) (STR-DE535 only)

•R6 (size-AA) batteries (2) (STR-DE435 only)

•Operating Instructions of the remote (1)

•Operating Instructions of CONTROL A1 II (1) (STR-DE535 only)

Inserting batteries into the remote

Insert the LR6 (STR-DE535) or R6 (STR-DE435) (Size

AA)batteries with the + and – properly oriented in the battery compartment. When using the remote, point it

at the remote sensor (STR-DE535) or g(STR- DE435) on the receiver.

For details, refer to the operating instructions supplied with your remote.

You cannot operate the following buttons on the RM-PP402 remote (STR-DE435 only)

•VIDEO2

•VIDEO3

•DVD

•PHONO

•SOUND FIELD A. F. D.

Notes

•Do not leave the remote in an extremely hot or humid place.

•Do not use a new battery with an old one.

•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.

•If you don’t use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

Hookup Overview

The receiver allows you to connect and control the following audio/video components. Follow the hookup procedures for the components that you want to connect to the receiver on the pages specified. To learn the locations and names of each jack, see “Rear Panel Descriptions” on page 28.

		Video Component
		Hookups (6)			DVD player/AC-3
		TV monitor			decoder
				Antenna Hookups (5)
Speaker		TV tuner
					AM/FM antenna
System		SAT (Satellite
Hookups (7)
		receiver)/LD
	Front		player			Front
speaker						speaker
			VCR
	(L)						(R)

	CD player	Center	Active
Rear		speaker	woofer	Rear
speaker	MD/Tape deck			speaker
(L)				(R)
	Turntable
	(STR-DE535
	only)

Audio Component

Hookups (5)

Before you get started

•Turn off the power to all components before making any connections.

•Do not connect the AC power cords until all of the connections are completed.

•Be sure to make connections firmly to avoid hum and noise.

•When connecting an audio/video cable, be sure to match the color-coded pins to the appropriate jacks on the components: Yellow (video) to Yellow; White (left, audio) to White; and Red (right, audio) to Red.

4US