12EN
Receiver Operations
Tuning preset stations (preset tuning)
You can tune directly to a preset station by entering its
preset number. If you don’t know which stations are
preset on which numbers, you can tune by scanning
the preset stations.
1Press TUNER.
The last received station is tuned in.
2Press SHIFT to select a memory page (A, B or C),
then press the number.
For example, select A and then press 7 to tune in
the station preset as A7.
You can tune by scanning the preset stations
Press TUNER and then DISPLAY so that the frequency
display appears. Then press PRESET TUNING + or – to
select the station you want. Each time you press the
buttons, the preset numbers change as follows:
1Press TUNER.
The last station you received is tuned in.
2Tune in the preset station you want to create an
index for.
If you are not familiar with how to tune in preset
stations, see “Tuning preset stations (preset
tuning)” above.
3Press DPC MODE repeatedly until the INDEX
indicator lights up.
4Create a station index name by using the digital
processing control buttons as follows:
Press or to select a character, and then
press to move the cursor to the next position.
To insert a space, press or until a blank space
appears in the display (the space is between “}” and
“!”).
The station index is stored automatically.
If you’ve made a mistake
Press or repeatedly until the character you want to
change flashes. Then select the right character.
5Repeat Steps 2 to 4 to assign index names to other
stations.
You can display either the index name or frequency
Each time you press DISPLAY, the display switches
between the frequency and the index name.
Scanning indexed stations (index tuning)
Once you select a station index, you can scan all the
stations with that station index.
1Press TUNER.
The last station you received is tuned in.
2Press DISPLAY so that the index mode appears in
the display.
The station index for the last station you received
appears in the display.
If “_ _ _ _ ” appears
The station does not have a station index.
3Press TUNING/INDEX SELECT + or – to select
the station index you want to scan.
4Press PRESET TUNING + or – to select the station
you want receive.
To select different station indexes
Press TUNING/INDEX SELECT + or – to select the one you
want, then press PRESET TUNING + or – to select a station.
Indexing
You can index preset stations and then use the index
names to scan specific stations in the preset memory.
You can also use the index feature to label program
sources so that the receiver displays the names of the
components you connected, for example, “VHS”.
Indexing preset stations
You might find that too many preset stations make it
hard to find the station you want. This receiver
includes a feature that lets you group preset stations by
name (station index) using up to 8 characters.
For example, if you label all of your preset jazz stations
“JAZZ,” selecting “JAZZ” lets you skip other presets
and scan only the stations labeled “JAZZ.” Note that
you cannot assign more than one station index name to
each preset station.
TUNER MEMORY
PRESET TUNING +/–DPC MODE
Digital
processing
control buttons DISPLAYTUNING/
INDEX SELECT +/–
nA1˜A2˜...˜A0˜B1˜B2˜...˜B0N
nC0˜...C2˜C1N