5. FISH FINDER SETUP MENU
There are two methods to select the Fish Finder Setup menu:
1.From the Chart page
a.Press [MENU], move the ShuttlePoint knob to SETUP (Setup menu) and press [ENT].
b.Move the ShuttlePoint knob to FISH FINDER SETUP and press [ENT].
2.From the Full Fish Finder page
a.Press [MENU] to show the Fish Finder Setup menu.
Figure 5 - Fish Finder Setup menu
The following paragraphs describe the Fish Finder Setup menu
5.0PRESET
To simply menu selections, the FF520 has two presets that can be easily selected for Fishing or Cruising:
|
| FISH | CRUISE |
|
| Gain | Auto | Auto |
|
| Range mode | Auto | Auto |
|
| Gain offset | 0% | 10% |
|
| Shift | 0 | 0 |
|
| STC | Short | Short |
|
| Noise level | 2 | 4 |
|
| Scrolling Speed | 10 | 10 |
|
| Fish Symbols | Echo | Echo |
|
| On | On |
| |
| Surface Declutter | 4 | 4 |
|
|
|
|
|
|
NOTE
For Gain and Gain Offset settings refer to Sensitivity menu (see Par. 5.5).
For Range and Shift settings refer to Range menu (see Par. 5.3).
5.1PAGE SELECTION
The Page Selection menu allows you to adjust the Fish Finder display page to your preference.
FF520 |
| Page 27 |
|
