Figure 5.8 - Alarms menu
To set an Anchor Alarm, enter in a shallow water and depth value above and below your actual anchoring depth. The alarm will sound when the depth becomes shallower or deeper than the settings.
5.8.0Shallow Water
Triggers an alarm when depth becomes shallower than the set depth.
5.8.1Depth Water
Triggers an alarm when depth becomes deeper than the set depth.
5.8.2Fish
The options for Fish Alarm set the size of the fishes that, if detected by the unit, switches an alarm to sound. The options are: Off, Small, Medium, Big and Huge. The alarm sounds if the set size (or bigger) is detected.
5.8.3Temperature Upper
Triggers an alarm when the transducer reports a temperature above the set temperature.
5.8.4Temperature Lower
Triggers an alarm when the transducer reports a temperature below the set temperature.
5.8.5Temperature Rate
Triggers an alarm when the transducer reports a temperature variation rate above the set temperature.
5.9SAVE SETTINGS TO USER C-CARD
Figure 5.9 - C-Card - Save settings
FF520 |
| Page 35 |
|
