107US
D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF
02\4428194122_USFR\US05ENJ_STR-DA1800ES-CEL.fm masterpage: Right
STR-DA1800ES
4-428-194-12(2)
Adjusting Settings

To check the software version

1Select “Software Update”, then press
.
2Select “Version”, then press .
The software version appears on the TV
screen.

Bluetooth Settings

You can adjust the settings for the Bluetooth.

xPairing

Lets you pair the Bluetooth device with the
receiver.

xBT Standby (Bluetooth Standby)

While the “BT Standby” mode is set to “ON”,
the receiver can be controlled by the Bluetooth
device even when the receiver is in standby
mode.
1Select “BT Standby”, then press .
2Select “ON” or “OFF”, then press .
•ON: The receiver turns on automatically
when the Bluetooth device is connected
to the receiver.
•OFF: The receiver does not turns on.
Note
You can only select this parameter when a Bluetooth
device is paired.

xClear History

Lets you clear all paired Bluetooth device and
connection information from the receiver.
1Select “Clear History”, then press .
“Clear all history?” appears on the TV
screen.
2Press B/b to select “OK”, then press
.
“Complete!” appears, and all history is
deleted.
Note
You cannot clear the history in the following cases.
– No paired Bluetooth devices in history.
– When you perform a pairing operation.

xAddress Info

Lets you check the Bluetooth device address
information. You can check the address
information when a Bluetooth device is
connected.

System Settings

You can adjust the settings of the receiver.

x12V Trigger

Lets you select various options for use of the
12V Trigger function.
•OFF: Turns off output of 12V trigger even
when the main receiver is turned on.
•CTRL: Turns the output of 12V trigger on
or off manually using the control command
of an external control device.
•ZONE: Turns the output of 12V trigger on
or off based on whether the main zone is
turned on or off.
•INPUT (for “Main” only): Turns on the
output of 12V trigger when the preset input
is selected.
When you select “Input”, the setting display
which sets each input trigger to on/off
appears. Press V/v to select the input, then
press to select on or off.
•HDMI A (for “Main” only): Turns the
output of 12V trigger on or off based on the
output setting of the HDMI OUT A jack.
•HDMI B (for “Main” only): Turns the
output of 12V trigger on or off based on the
output setting of the HDMI OUT B jack.

xRS232C Ctrl

Lets you turn the control mode for
maintenance and service on or off.
•ON
•OFF
continued