Sony STR-DA1800ES 1, 2, To set the auto access permission 1, 2 3, To add devices to the device list 1, 2, 3 4, To set access permission for the devices, 1, 2, 3, 4 5

105US
D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF
02\4428194122_USFR\US05ENJ_STR-DA1800ES-CEL.fm masterpage: Right
STR-DA1800ES
4-428-194-12(2)
Adjusting Settings
xPARTY STREAMING
Lets you set the receiver to use the PARTY
STREAMING function.
1Select “PARTY STREAMING”, then
press .
2Select “On” or “Off”, then press .
•On: The receiver can be detected by
other devices on the home network.
The receiver can start or close a PARTY,
and can join or leave a PARTY.
•Off: The receiver can be detected by
other devices on the home network.
However, the receiver cannot start or
close a PARTY, and cannot join or leave
a PARTY.
xAccess Settings
Lets you set access restriction or permission
for the devices on the device list.
To set the auto access
permission
1Select “Access Settings”, then press
.
2Select “Auto Access”, then press .
3Select “Allow” or “Not Allow”, then
press .
•Allow: All the devices on the home
network are permitted to access this
receiver.
This receiver can start a PARTY as host
device and join a PARTY as a guest
device if requested.
•Not Allow: The receiver restricts a new
device that is accessing the receiver.
When connecting a new device to the
home network, add the device to the
device list, and set access permission
(page 105).
Note
Up to 20 devices can be added to the device list. If
20 devices have already been registered, “Device
Full” appears, and a new device cannot be added to
the list. In this case, delete unnecessary devices from
the list (page 105).
To add devices to the device list
1Select “Access Settings”, then press
.
2Select “Control Device”, then press .
The registered device list appears on the
TV screen.
3Select “Add Device”, then press .
4Select the device you want, then press
.
The selected device is added to the device
list. For details on setting the access
permission, see “To set access permission
for the devices” (page 105).
To set access permission for
the devices
You can set access permission for a device on
the device list. Only devices set to “Allow” are
recognized on the home network.
1Select “Access Settings”, then press
.
2Select “Control Device”, then press .
The registered device list appears on the
TV screen.
3Select the device you want, then press
.
4Select “Access”, then press .
5Select “Allow” or “Not Allow”, then
press .
To delete a device from the list
Select “Delete” in step 4, then press . Select
“OK” on the confirmation display, then press .
xMedia Remote Device
Registration
Lets you register your Media Remote devices.
continued