86US
D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF
02\4428194122_USFR\US05ENJ_STR-DA1800ES-CEL.fm masterpage: Left
STR-DA1800ES
4-428-194-12(2)
Note
When establishing a connection with this
receiver, select the audio profile (A2DP,
AVRCP) at the Bluetooth device. If the
Bluetooth device does not support the AVRCP
profile, you cannot perform playback or other
operations with this receiver (page 84).
5Select “STR-DA1800ES” on the
Bluetooth device display.
If “STR-DA1800ES” is not displayed,
repeat from step 1.
6If passkey* is required on the
display of the Bluetooth device,
enter “0000”.
7Once pairing is completed,
connect this receiver with the
Bluetooth device.
Depending on the device, connection is
automatically made along with the
pairing. Once the connection is
established, the device name appears on
the TV screen and “BLUETOOTH”
lights up on the display panel.
* Passkey may be called “Passcode”, “PIN code”,
“PIN number” or “Password”.
Notes
• If pairing is not successful, “Cancel” appears on
the TV screen. Repeat steps 1 to 6.
• The receiver only supports numerical passkey up to
4 digits.
• You can pair up to 9 Bluetooth devices with this
receiver. If 10th Bluetooth device is paired, the
least recently connected device will be replaced by
the new one.
• To pair with other Bluetooth devices, repeats steps
1 to 6.
• To delete all pairing information, see “Clear
History” (page 107).

To cancel pairing operation

Hold down BLUETOOTH after step 3.
“Cancel” appears on the TV screen.
You can operate a Bluetooth device by
connecting the receiver and a Bluetooth device
using AVRCP.
Check the following before playing music:
– The Bluetooth function of the Bluetooth
device is turned on.
– Pairing has been completed.
1Press BLUETOOTH to select
Bluetooth function.
The receiver automatically connects to
the last connected Bluetooth device.
If you cannot connect with a last
connected Bluetooth device, press
BLUETOOTH on the receiver.
Once the connection is established,
proceed to step 3.
2Establish a connection from
the Bluetooth device.
For details, refer to the operating
instructions of your Bluetooth device.
3Start playback from the
Bluetooth device.
You can also press N on the remote
control.
4Adjust the volume.
Press MASTER VOL +/– (or MASTER
VOLUME on the receiver).
Note
Depending on the type of Bluetooth device,
you can adjust the volume using the controls of
the Bluetooth device.
Notes
• Once the connection is established, the device
name appears on the TV screen and
“BLUETOOTH” lights up on the display panel.
• To disconnect from a Bluetooth device, press
BLUETOOTH on the receiver. You can also
disconnect from a Bluetooth device. For details,
refer to the operating instructions of your Bluetooth
device.

Playing music of a Bluetooth

device