1
2
3 Rotate MENU to select the menu item you want.
For more information, see “Speaker setup parameters”.
Notes
• Certain setup parameters may be dimmed in the display. This means that the selected parameter is either unavailale or fixed and unchangeable due to sound field (pages 34–36) or other settings.
• Some speaker setup items may appear dimmed in the display. This means that they have been adjusted automatically due to other speaker settings. Depending on the settings, you may or may not be able to adjust certain speakers.
4 Rotate –/+ to select the parameter.
5 Repeat steps 3 and 4 until you have set all of the items that follow.
Speaker setup parameters The initial settings are underlined.
x SP EASY SET UP (Speaker easy setup)
• YES
You can set up your speakers automatically by selecting a pre-defined speaker pattern (see the supplied “Easy Setup Guide”).
• NO
Select to adjust the settings of each speaker manually.
x SPEAKER PATTERN (Speaker setup pattern)
When “SP EASY SET UP” is set to “YES”, select the speaker setup pattern. Rotate –/+ to select the speaker setup pattern and press MEMORY/ENTER to enter the selection.
Press ?/1 to turn on the system.
Rotate MAIN MENU to select “SPEAKER SET UP”.
5: Setting up the speakers
You can use the SPEAKER SET UP menu to set the size and distance of the speakers connected to this system.
2Move the easy scroll key to select “AMP REGIST”, then press the key to enter the selection.
3If the displayed model name is same as the model you use, select “Exit”. If a different model name or “? ? ?” appears, move the easy scroll key to select “START”, then press the key to enter the selection.
After “SEARCHING” appears, the model name appears. Make sure to keep the remote pointing toward the receiver until the model name appears. The remote is reset, turns off, and optimized for the model. The customized settings of the remote is cleared and reset to their factory settings.
Started Getting
continued