Each time you press the button, you can select the preset station as follows:

tA1yA2y...yA0yB1yB2y...yB0T

tC0y...yC2yC1T

Using the remote

RM-LJ312

1Press INPUT SELECTOR, then move the easy scroll key to select “TUNER” from the input list.

2Move the easy scroll key to select the preset number you want, then press the key to enter the selection.

RM-LG112

1Move the easy scroll key to select “TUNER”, then press the key repeatedly to select “FM” or “AM”.

2Press D.SKIP/CH/PRESET +/– repeatedly to select the preset station you want.

28GB

Using the Radio Data

System (RDS)

(Models of area code CEL only)

This receiver also allows you to use RDS (Radio Data System), which enables radio stations to send additional information along with the regular program signal. You can display RDS information.

Receiving RDS broadcasts

Simply select a station on the FM band using direct tuning (page 26), automatic tuning (page 25), or preset tuning (page 27).

When you tune in a station that provides RDS services, the RDS indicator lights up and the program service name appears in the display.

Note

RDS may not work properly if the station you tuned to is not transmitting the RDS signal properly or if the signal strength is weak.

Displaying RDS informationWhile receiving an RDS station, pressDISPLAY.

Each time you press the button, RDS information on the display changes cyclically as follows:

Top level

One of the followings, band, and preset number is displayed:

PS (Program Service name)a)

Present station nameb)

Frequency

Lower level

PTY (Program Type) indicationc) t RT (Radio Text) indicationd) t CT (Time) indication (in 24-hour system level) t Sound field currectly applied

a)This information also appears for non-RDS FM stations.

b)Appears only when the preset station is indered.

c)Type of program being broadcast (see page 29).

d)Text messages sent by the RDS station.