xNAME IN? (Naming inputs)
Lets you set the name of inputs selected with INPUT SELECTOR. For details, see “Naming preset stations and inputs” on page 49.
xSP POSI.
(Surround speaker position)*
Lets you specify the location of your surround speakers for proper implementation of the surround effects in the Cinema Studio EX modes (page 34).
When “MENU EXPAND” is set to “ON”, all of the following parameters are displayed and adjustable.
100˚
120˚
See page 19 for the SPEAKER SET UP menu adjustments. Initial settings are underlined.
All SPEAKER SET UP menu parametersSP EASY SET UP
SPEAKER PATTERN
SUB WOOFER
FRONT SP
CENTER SP
SURROUND SP
SURR BACK SP
FRONT XXX meter (feet)*
CENTER XXX meter (feet)*
SURROUND XXX meter (feet)*
SURR BACK XXX meter (feet)*
SUB WOOFER XXX meter (feet)*
DISTANCE UNIT**
SP POSI.**
SP CROSSOVER > XXX Hz
*Default unit is “feet” for models of area code U, CA. Default unit is “meter” for models of other area codes.
**Adjustable only when “MENU EXPAND” is set to “ON”.
xDISTANCE UNIT (Distance unit)
Lets you select the unit of measure for setting distances.
•feet (default for models of area code U, CA) The distance is displayed in feet.
•meter (default for models for models of other area codes)
The distance is displayed in meters.
A | A |
B B
D D
60
C C
30
•SIDE/LOW
Select if the location of your surround speakers corresponds to section A and C.
•SIDE/HIGH
Select if the location of your surround speakers corresponds to section A and D.
•BEHD/LOW
Select if the location of your surround speakers corresponds to section B and C.
•BEHD/HIGH
Select if the location of your surround speakers corresponds to section B and D.
*This setup item is not available when the surround speaker parameter is set to “NO” (page 20).
Tip
Surround speaker position is designed specifically for implementation of the Cinema Studio EX modes. For other sound fields, speaker position is not so critical. Those sound fields were designed under the premise that the surround speakers would be located behind the listening position, but presentation remains fairly consistent even with the surround speakers positioned at a rather wide angle. However, if the speakers are pointing toward the listener from the immediate left and right of the listening position, the surround effects becomes unclear unless set to “SIDE”.