Using the Sleep Timer

You can set the receiver to turn off automatically at a specified time by using the remote.

For details, refer to the operating instructions supplied with the remote.

RM-LJ312:

Select SLEEP from the RECEIVER menu, then press the key repeatedly while the power is on.

RM-LG112:

Press ALT, then press SLEEP repeatedly while the power is on.

Each time you select or press SLEEP, the display changes cyclically as follows:

2:00:00 t 1:30:00 t 1:00:00 t 0:30:00 t

OFF

While using Sleep Timer, “SLEEP” lights up in the display.

Tip

To check the remaining time before the receiver turns off, select SLEEP from the RECEIVER menu (RM- LJ312) or press ALT, then press SLEEP (RM-LG112). The remaining time appears in the display.

Selecting the speaker system

Set the SPEAKERS switch according to the front speakers you want to drive.

Set to

To select

AThe speakers connected to the FRONT SPEAKERS A terminals.

BThe speakers connected to the FRONT SPEAKERS B terminals.

A+B

The speakers connected to both the

 

FRONT SPEAKERS A and B terminals

 

(parallel connection).

 

 

OFF

No speaker output.

 

 

50GB