Getting Started

1: Check how to hookup your components

Steps 1a through 1c beginning on page 8 describe how to hook up your components to this receiver. Before you begin, refer to “Connectable components” below for the pages which describe how to connect each component.

After hooking up all your components, proceed to “2: Connecting the antennas” (page 15).

Connectable components

Component to be connected

Page

DVD player

 

 

 

With digital audio outputa)

8–9

With multi-channel audio outputb)

11–12

With analog audio output onlyc)

8–9

TV monitor

 

 

 

With component video inputd)

9 or 12

With S-Video or composite video input only

14

 

 

Satellite tuner

 

 

 

With digital audio outputa)

8–9

With analog audio output onlyc)

8–9

CD/Super Audio CD player

 

 

 

With digital audio outputa)

10

With multi-channel audio outputb)

11

With analog audio output onlyc)

13

MD/DAT deck

 

 

 

With digital audio outputa)

10

With analog audio output onlyc)

13

Tape deck, Analog disc turntable

13

 

 

Multi-channel decoder

11

 

 

VCR, video camera, video game, etc.

14

 

 

a)Model with a DIGITAL OPTICAL OUTPUT or DIGITAL COAXIAL OUTPUT jack, etc.

b)Model with MULTI CH OUTPUT jacks, etc. This connection is used to output the audio decoded by the component’s internal multi-channel decoder through this receiver.

c)Model equipped only with AUDIO OUT L/R jacks, etc.

d)Model with component video (Y, PB/CB/B-Y, PR/CR/R-Y) input jacks.

6GB