Custom install mode

(Models of area code U, CA only)

This receiver features the custom install modes described below. Depending on how you intend to use these features, use of these modes may require additional equipment (available separately) or modification of your listening environment. Please consult the retailer where you purchased this receiver for more information.

1 Rotate MAIN MENU to select “CIS”.2 Rotate MENU to select the parameter.

For details, see “CIS menu parameters” below.

3 Rotate –/+ to select the setting you want.4 Repeat steps 2 and 3 to adjust the other items.CIS menu parameters

Initial settings are underlined.

x2ND ZONE (2nd zone source)

x3RD ZONE (3rd zone source) (STR-DA5000ES only)

Lets you select the source signals (analog audio and video signals for 2nd zone; only analog audio signals for 3rd zone) you want to output in the 2nd zone or 3rd zone (except PHONO). When you select “SOURCE”, the signals of the current input is output.

Tips

Only signals from components connected to the analog input jacks are output through the 2ND ZONE or 3RD ZONE jacks. No signal is output from components connected to only the digital input jacks.

When “SOURCE” is selected, the signals input to the MULTI CHANNEL INPUT jacks are not output from the 2ND ZONE or 3RD ZONE jacks even when MULTI CH IN function is used. The 2 channel analog audio signals of the current input is output.

xINSTALLER MODE (RS232C control)

ON

The receiver can receive commands from the RS232C port even when the power is off (standby mode).

OFF

The receiver does not receive commands from the RS232C port when the power is off (standby mode).

x12V TRIG. MAIN

(12 V trigger for the main receiver)

x12V TRIG. 2ND

(12 V trigger for the 2nd zone)

x12V TRIG. 3RD

(12 V trigger for the 3rd zone) (STR-DA5000ES only)

Lets you turn on or off the external equipment by

 

outputting 12V triggers (STR-DA5000ES: 3 outputs,

 

STR-DA3000ES: 2 outputs) when the receiver is

 

turned on or off. For example, you can automatically

 

unroll your video screen when you turn on the receiver.

Advanced

OFF

 

Lets you turn off output of 12V triggers even when

 

the main receiver is turned on.

 

• CTRL

Adjustments

Lets you turn on or off the output of 12V triggers

 

manually by the CIS command of the IR remote or

 

RS232C control.

 

• ZONE

 

Lets you turn on output of 12V triggers when the

 

main receiver or the receiver in each zone is turned

and

on.

 

• INPUT (for “12V TRIG. MAIN” only)

Settings

Lets you turn on output of 12V triggers when the

 

main receiver is turned on, depending on the setting

 

of each input. See “To set the 12V trigger setting for

 

each input”.

 

• MAIN (for “12V TRIG. 2ND” and “12V TRIG.

 

3RD” only)

 

Lets you link 2nd or 3rd zone trigger operation to the

 

main receiver.

 

To set the 12V trigger setting for each input

The initial setting is “OFF” for all inputs. To set this setting, you can use only the controls on the front panel.

1Select “INPUT” in “12V TRIG. MAIN”.

2Press MEMORY/ENTER.

3Rotate MENU to select the input.

4Rotate –/+ to select “ON” to activate 12V trigger or select “OFF” to disactivate.

5Press MEMORY/ENTER.

47GB