Sony STR-DA5300ES 1,5, 2,3, 1,3, Program the sequence of the operation, Tip, the, Tip, M, m, Press, MACRO, 123GB, H, x, X, The input, programmed, MACRO 1 or, 1 or MACRO

Program the sequence of the operation1,5

2,3

3

1,31 Press MACRO 1 or MACRO 2 for more than 1 second while pressing RM SET UP.

The RM SET UP button flashes.

Tip

When you press RM SET UP, use a thin wire, such as a paper clip.

2 Press the input button of the component that you want to

assign one of the following operations.The selected input button lights up.

3 Press the button for the operation you want to perform to learn the function as follows.

	Press	Operations to be
		programmed
	H, x, X,	Performs the operation
	M, m,	of the button.
., >
	The input	Switches inputs.
	button for more
	than 1 second
	MACRO 1 or	Make a one second
	MACRO 2	interval. When you want
		to make a longer
		interval, press MACRO
		1 or MACRO 2
		repeatedly.
	The input button selected in step 2 flashes
	twice, then lights up again.
4 Repeat steps 2 and 3. When you
	want to assign another
	command for the same
			Using
	component, repeat step 3.
5 Press RM SET UP to finish the			the
	programming process.
	Tip		Remote

If the RM SET UP button flashes five times in step 1, and the macro programming process does not start, replace the batteries with new ones.

To cancel programming

Press RM SET UP. Also, not pressing any button for 60 seconds cancels the settings. The previous command remains valid.

continued

123GB