will be output from the sub woofer if the digital input signal contains L.F.E. signals, or if the front or surround speakers are set to “SMALL,” the sound field for movie is selected, or “Portable Audio” is selected.

xDistance(Distance from the seating position to each speaker)

You can adjust the distance from the seating position to each speaker (front left/right, center, surround left/right, surround back left/ right, sub woofer).

You can adjust the distance from 1.0 meter to 10.0 meters in 1 cm steps.xSize(Size of each speaker)

You can adjust each speaker’s (front left/right, center, surround left/right, surround back left/ right) size.

•LARGE

If you connect large speakers that will effectively reproduce bass frequencies, select “LARGE.” Normally, select “LARGE.”

•SMALL

If the sound is distorted, or you feel a lack of surround effects when using multi-channel surround sound, select “SMALL” to activate the bass redirection circuitry and output the

bass frequencies of each channel from the sub woofer or other “LARGE” speakers.

Tips

• The “LARGE” and “SMALL” settings for each

 

speaker determine whether the internal sound

 

processor will cut the bass signal from that

 

channel.

 

When the bass is cut from a channel, the bass

 

redirection circuitry sends the corresponding bass

 

frequencies to the sub woofer or other “LARGE”

 

speakers.

 

However, since bass sound has a certain amount of

 

directionality, it is best not to cut it, if possible.

 

Therefore, even when using small speakers, you

 

can set them to “LARGE” if you want to output the

 

bass frequencies from that speaker. On the other

 

hand, if you are using a large speaker, but prefer not

 

to have bass frequencies output from that speaker,

 

set it to “SMALL.”

 

Advanced

If the overall sound level is lower than you prefer,

 

set all speakers to “LARGE.” If there is not enough

 

bass, you can use the equalizer to boost the bass

 

levels.

 

• The surround back speakers will be set to the same

Speakers

setting as that of the surround speakers.

 

• When the front speakers are set to “SMALL,” the

 

center, surround, and surround back speakers are

 

also automatically set to “SMALL.”

Setting

• If you do not use the sub woofer, the front speakers

 

are automatically set to “LARGE.”

 

x Position

Up

(Surround speakers position)

 

Lets you specify the location of your surround

 

speakers for proper implementation of the

 

surround effects in the Cinema Studio EX

 

modes. This setup item is not available when

 

there are no surround speakers.

 

continued

75GB