Sony STR-DA5300ES 48GB, Press b, seconds, •Speaker Level, •Speaker Distance, Interface)” (page 41), Press to select “Start.”, •Frequency Characteristic

a)This receiver corrects signals by analog downmix processing only for the center speaker and sub woofer when the multi-channel input is selected. The correction is invalid for other speakers.

b)The measurement result is not utilized when the multi-channel input is selected.

c)• Signals with a sampling frequency of more than 96 kHz are always played back at either 44.1 kHz or 48 kHz.

•The measurement result is not utilized in the following cases.

–The multi-channel input is selected. –“2ch Analog Direct” is being used. –Dolby TrueHD signals with a sampling

frequency of more than 96 kHz are being received.

2 Press V/v repeatedly to select “Settings,” then press or b.

The Settings menu list appears on the TV screen.

3 Press V/v repeatedly to select “Auto Calibration,” then press or b.4 Press V/v repeatedly to select “Quick Setup,” then press .5 Press V/v repeatedly and to un-check the items you do not want to measure.•Speaker Distance•Speaker Level•Frequency Characteristic

6

1 7

2-7

Press b.Press to select “Start.”

1 Press AMP MENU to display the GUI menu on the TV screen.

If “GUI MODE” is not displayed in the	8 The measurement starts in five
display window of the receiver, follow the	seconds.
steps given in “7: Operating the receiver
using the GUI (Graphical User
Interface)” (page 41).

48GB