Sony STR-DA5300ES Setting remote control codes that are not stored in the remote, 1,6, Tip, Note, 124GB, 1Press AMP, 2Press RM SET UP, Starting macro play

Starting macro play1Press AMP.The AMP button lights up, and then turns off.2Press MACRO 1 or MACRO 2 to start the macro.

The macro starts and execute the commands in the order you assigned them. While the commands are being sent, the RM SET UP button flashes and the AMP button lights up. When the commands have been sent, the RM SET UP and AMP buttons turn off.

To erase a programmed macro

1Press MACRO 1 or MACRO 2 for more than 1 second while pressing RM SET UP to clear the stored macro.

The RM SET UP button flashes, repeatedly.2Press RM SET UP.Settings stored as macro are cleared.

Setting remote control codes that are not stored in the remote

Even if a remote control code is not one of the presets stored in the remote, it is possible for the remote to learn the code using the learning function.

Note

When setting up the receiver to learn the remote command modes, replace the batteries with new ones.

1,6

1

2

Example for assigning numeric button 1 to VIDEO 1 of the remote:1 Press TV while pressing RM SET UP.The RM SET UP button lights up.

Tip

When you press RM SET UP, use a thin wire, such as a paper clip.

2 Press the input button (VIDEO 1 in the example) for which you want to use the Learning input function.

The input button flashes. (The RM SET UP button remains lit.)

124GB