Other Operations
Naming preset stations
and program sources
You can enter a name of up to 8 characters for preset stations and program sources. These names (for example, “VHS”) appear in the receiver’s display when a station or program source is selected. Note that no more than one name can be entered for each preset station or program source.
This function is useful for distinguishing components of the same kind. For example, two VCRs can be specified as “VHS” and “8mm”, respectively. It is also handy for identifying components connected to jacks meant for another type of component, for example, a second CD player connected to the MD/DAT jacks.
1
4 Press ENTER.
5 Repeat steps 2 to 4 to assign index name for another station or program source.
Note
(Models of area code CEL only)
You cannot change the name of an RDS station.
Recording
Before you begin, make sure you’ve connected all components properly.
Recording on an audio tape or MiniDisc
You can record on a cassette tape or MiniDisc using the receiver. See the operating instructions of your cassette deck or MD deck if you need help.
1 Select the component to be recorded.
2 Prepare the component for playing.
For example, insert a CD into the CD player.
3 Insert a blank tape or MD into the recording deck and adjust the recording level, if necessary.
4 Start recording on the recording deck, then start playback on the playback component.
continued
Operations Other
43