Troubleshooting (continued)
Reference sections for clearing the receiver’s memory
To clear | See |
All memorized settings | page 18 |
|
|
Customized sound fields | page 37 |
|
|
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than
0.09% total harmonic distortion from 250 milliwatts to rated output (Models of area code U only).
Amplifier section
POWER OUTPUT
Models of area code U, CA
Rated Power Output at Stereo Mode (8 ohms 20 Hz – 20 kHz, THD 0.09 %)
100 W + 100 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %) 90 W + 90 W
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT1):100 W + 100 W | |
| CENTER1): 100 W |
| SURR1): 100 W + 100 W |
| SURR BACK1): 100 W |
FRONT1): 100 W + 100 W | |
| CENTER1): 100 W |
| SURR1): 100 W + 100 W |
(4 ohms 20 Hz – 20 kHz, THD 0.09 %) | |
FRONT:1) 90 W + 90 W | |
| CENTER1): 90 W |
| SURR1): 90 W + 90 W |
| SURR BACK1): 90 W |
FRONT1):90 W + 90 W | |
| CENTER1): 90 W |
| SURR1): 90 W + 90 W |
Models of other area code
Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0.7 %)
100 W + 100 W2) | |
| 90 W + 90 W3) |
100 W + 100 W2) | |
(4 ohms 1 kHz, THD 0.7 %) | |
90 W + 90 W2) | |
52 | 80 W + 80 W3) |
100 W + 100 W2) |
Reference Power Output2) (8 ohms 1 kHz, THD 0.7 %)
FRONT1): 100 W + 100 W | |
| CENTER1): 100 W |
| SURR1): 100 W + 100 W |
| SURR BACK1): 100 W |
FRONT1): 100 W + 100 W | |
| CENTER1): 100 W |
| SURR1): 100 W + 100 W |
(4 ohms 1 kHz, THD 0.7 %) | |
FRONT1): 90 W + 90 W | |
| CENTER1): 90 W |
| SURR1): 90 W + 90 W |
| SURR BACK1): 90 W |
FRONT1): 100 W + 100 W | |
| CENTER1): 100 W |
| SURR1): 100 W + 100 W |
(8 ohms 20 Hz – 20 kHz, THD 0.09 %) | |
FRONT1): 90 W + 90 W | |
| CENTER1): 90 W |
| SURR1): 90 W + 90 W |
| SURR BACK1): 90 W |
FRONT1): 90 W + 90 W | |
| CENTER1): 90 W |
| SURR1): 90 W + 90 W |
(4 ohms 20 Hz – 20 kHz, THD 0.09 %) | |
FRONT1): 80 W + 80 W | |
| CENTER1): 80 W |
| SURR1): 80 W + 80 W |
| SURR BACK1): 80 W |
FRONT1): 90 W + 90 W | |
| CENTER1): 90 W |
| SURR1): 90 W + 90 W |
1)Depending on the sound field settings and the source, there may be no sound output.
2)Measured under the following conditions:
| Area code | Power requirements |
| E | 240 V AC, 50 Hz |
|
|
|
| CN, SP, CEL | 230 V AC, 50 Hz |
|
|
|
| TW | 110 V AC, 60 Hz |
|
| |
3) Measured under the following conditions: | ||
|
|
|
| Area code | Power requirements |
|
|
|
| CN | 220 V AC, 50 Hz |
|
|
|