Adjustments using the SET UP button (continued)

xDigital power management (D.POWER)

Lets you enjoy the analog source without the influence of digital circuits.

•“AUTO OFF” turns off the power of the unnecessary digital circuits automatically when you use analog inputs or functions that bypass digital processing when MULTI/2CH A. DIRECT function is used.

•“ALWAYS ON” keeps the power of digital circuits on. Select if you do not like the time lag that occurs with the “AUTO OFF” setting when digital circuits are turned on, etc.

xVideo power management (V.POWER)

Lets you enjoy the sound without the influence of the video circuits.

•“AUTO OFF” turns off the power of video circuits automatically when there are unnecessary.

•“ALWAYS ON” keeps the power of video circuits on. Depending on the monitor, noise may be produced or the picture may be distorted when the power of the video circuits is turned on. In this case, select “ALWAYS ON”.

xSound field link (S.FIELD LINK)

Lets you apply the last selected sound field to a program source whenever it is selected. For example, if you listen to CD with STADIUM as the sound field, change to a different program source, then return to CD, STADIUM will be applied again.

xCONTROL A1 auto power on (A1 AUTO POWER)

Lets you turn on the receiver automatically when the component connected via CONTROL A1 cords (see page 14) is turned on and the playback is started.

When set to “OFF”, you can save the power consumption of the receiver during standby mode.

xCONTROL A1 auto function

(AUTO FUNCTION)

Lets you switch the function of this receiver to the Sony components connected via CONTROL A1 cords (see page 14) automatically when the connected component is set to play mode.

x2nd room speaker (2ND ROOM SP) (STR-DB1070 area code U, CA only)

Lets you set whether you would output the sound to the 2nd room or not.

xSelecting the command mode of the remote (COMMAND MODE)

Lets you select the command mode of the remote. Change the command mode when you use 2 Sony receivers in the same room.

xMonitor color system (COLOR SYSTEM)

(STR-DB1070 area code other than U, CA)

Lets you select the color system of your TV monitor.

xColor of the on-screen display (OSD)

(STR-DB1070 only)

Lets you select the color of the on-screen display.

xOSD horizontal position (OSD

H.POSITION) (STR-DB1070 only)

Lets you adjust the position of the on-screen display horizontally.

xOSD vertical position (OSD

V.POSITION) (STR-DB1070 only)

Lets you adjust the position of the on-screen display vertically.

46