Getting Started
Before You Use Your ReceiverBefore turning on the receiver, make sure that you have:
• Set the SPEAKERS button to ON.
Before you use your receiver for the first time or when you want to clear the receiver's memory, do the procedure below:
DIMMER
?/1 (power)
MUTING
1Turn off the receiver.
2Press ?/1(power) for more than 4 seconds. “INITIAL” appears in the display and the items including the following are reset or cleared:
•All preset stations are reset to their factory settings.
•All sound field parameters are reset to their factory settings.
•All index names (of preset stations and programme sources) are cleared.
•All adjustments made with the SET UP button are reset to their factory settings.
•The sound field memorized for each programme source and preset station is cleared.
Turn on the receiver and check the following indicator.
•Press MUTING if the MUTING indicator turns on.
•Press DIMMER repeatedly to set the display at any of four levels of brightness.
With
FM RDS stations are stored first, in alphabetical order by their Station Name, followed by regular FM stations in order of frequency. (For more details on RDS, see page 15.)
1Press ?/1(power) to turn off the receiver.
2Hold down MEMORY and press ?/1(power) to turn the receiver on.
”AUTOBETICAL SELECT” appears and the receiver scans and stores all the FM and FM RDS stations in the broadcast area.
“FINISH” appears when the receiver has finished storing the FM and FM RDS stations.
To change a preset code to another station
See ”Presetting Radio Stations” on page 14.
To stop
Press ?/1(power) to turn the receiver off.
Stations currently stored in the preset memory are shifted to the rear (toward C0) and may be erased, depending on the number of stations received by Auto- betical select.
Notes
•If you move to another area, repeat this procedure to store stations in your new area.
•For details on tuning to the preset stations, see page 14.
•Once “FINISH” appears, all the previous preset memories are cleared. Preset AM stations again if necessary.