Receiver Operations

Presetting Radio Stations

You’ll most likely want to preset the receiver with the radio stations you listen to often so that you don’t have to tune in the station every time. The receiver can store a total of 30 FM or AM stations. You can store the stations on preset numbers combining three characters (A, B, C) and numbers (0 - 9). For example, you can store a station as preset number A1, B6 or C9, etc.

PRESET/PTY SELECT +/–

 

DISPLAY MENU </> NAME

 

 

 

 

 

SHIFT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TUNER

+/– ENTER

MEMORY

1Press TUNER.

The last received station is tuned in.

2Tune in the station you want.

If you are not familiar with how to tune in a station, see “Receiving Broadcasts” on the previous page.

3Press MEMORY.

“MEMORY” appears for a few seconds.

Do steps 4 to 6 before “MEMORY” goes out.

4Press SHIFT to select a character (A, B or C). Each time you press SHIFT, the letter “A”, “B” or “C” appears in the display.

If “MEMORY” disappears, start again from step 3.

5Select a preset number by pressing PRESET/PTY SELECT + or PRESET/PTY SELECT –.

6Press MEMORY again to store the station.

7Repeat Steps 2 to 6 to preset other stations.

To change a preset station

Preset a new station on the number you want to change.

Note

If the mains lead is disconnected for about one week, the preset stations will be cleared from the receiver’s memory, and you will have to preset the stations again.

Tuning preset stations (preset tuning)

You can tune directly to a preset station by entering its preset number. If you don’t know which stations are preset on which numbers, you can tune by scanning the preset stations.

1Press TUNER.

The last received station is tuned in.

2Press SHIFT to select a character (A, B or C), then press the number on the remote.

For example, to tune in the station preset as A7, select A and then press 7.

You can tune by scanning the preset stations

First press TUNER and then press PRESET/PTY SELECT + or – to select the station you want. Each time you press the buttons, the preset numbers change as follows:

nA1 ˜A2 ˜… ˜A0 ˜B1 ˜B2 ˜… ˜B0 N

nC0 ˜… ˜C2 ˜C1 N

Naming preset stations

You can store names (index names), up to 8 characters long, for your preset stations (except for FM RDS stations). Once you name a preset station, the name appears in the display instead of the frequency when you tune to that preset station. The characters you can use include letters, numbers and symbols.

1Tune to the preset station you want to name.

2Press NAME.

The cursor blinks in the display.

3Use + or – to select the character you desire.

4Press MENU </> to move the cursor into position for the next character.

5Repeat steps 3 and 4 to enter up to 8 characters.

6Press ENTER to store the names.

If you make a mistake

Press MENU </> repeatedly so that the character you want to change blinks in the display, then use + or – to select the desired character.

Notes

You can also enter a name of up to 8 characters for programme sources. Select the programme source you want and repeat steps 2 to 6 (except 5.1 CH/DVD).

To clear programme source name, press NAME and then press the same programme source button. Press ENTER to delete the name (except TUNER).

14GB