Receiver Operations
1Press one of the Function buttons to select the component you want to use.
The Function buttons on the remote are factory- set as follows:
To listen or to watch | Press |
|
|
Radio programmes | TUNER |
|
|
Compact discs (CD) | CD |
|
|
MiniDisc (MD) or | MD/TAPE |
Audio tapes | |
|
|
TV programmes or | TV/SAT |
Satellite receiver | |
|
|
VHS Video tapes | VIDEO |
| |
|
|
DVD player/ | DVD/LD |
|
|
If you want to change the factory setting of a button, see the next section.
The receiver and the selected component turn on.
If the component does not turn on
Press the power switch on the component.
2Start playing.
Refer to “Remote Button Descriptions” on page 27 for details.
Changing the factory setting of a function button
If the factory settings of the FUNCTION buttons don’t match your system components, you can change them. For example, if you have two CD players and you don’t have a tape deck or an MD deck, you can assign the MD/TAPE button to your second CD player.
Note that the settings of the TUNER button cannot be changed.
AV ?/1
?/1
Function buttons
Numeric buttons
>10 ENTER
.
MASTER VOL –
1Hold down the Function button whose function you want to change (for example, MD/TAPE).
2Press the corresponding button of the component you want to assign to the Function button (for example, 1 - CD player).
The following buttons are assigned to select the functions:
To operate | Press |
|
|
CD player | 1 |
|
|
DAT deck | 2 |
|
|
MD deck | 3 |
|
|
Tape deck A | 4 |
|
|
Tape deck B | 5 |
|
|
LD player | 6 |
|
|
VCR (remote control mode VTR 1*) | 7 |
|
|
VCR (remote control mode VTR 2*) | 8 |
|
|
VCR (remote control mode VTR 3*) | 9 |
|
|
TV | 0 |
|
|
DSS (Digital Satellite System) | > 10 |
|
|
DVD | ENTER |
|
|
VCD player | . |
|
|
*Sony VCRs are operated with a VTR 1, 2 or 3 setting. These correspond to Beta, 8mm and VHS respectively.
Now you can use the MD/TAPE button to control a second CD player.
To change the AUX function to another function
Hold down SLEEP and press the corresponding button of the component you want to assign it to.
To change the 5.1 CH function to another function
Hold down AV ?/1and press the corresponding button of the component you want to assign it to.
To reset a button to its factory setting
Repeat the above procedure.
To reset all the function buttons to their factory setting
Press ?/1, AV ?/1and MASTER VOL – at the same time.