Other hookups (continued)
AUX AUDIO In hookup
If you have an individual audio component (except PHONO)
Use the audio cords to connect the LINE OUT jacks on the CD player, tape deck or MD deck to the AUX IN jacks on the receiver so that you can listen to stereo sources in surround sound.
Setting the voltage selector
If your receiver has a voltage selector on the rear panel, check that the voltage selector is set to the local power supply voltage. If not, use a screwdriver to set the selector to the correct position before connecting the AC power cord to a wall outlet.
VOLTAGE SELECTOR
120V 220V 240V
Connecting the AC power cord
AC power cord
L |
|
L | b |
RONT B |
|
L | To a |
wall outlet
AC OUTLET
L
AC OUTLET*
*Except for models of area code AR, KR, TW
The configuration, shape, and number of AC outlets vary according to the model and country to which the receiver is shipped.
Before connecting the AC power cord of this receiver to a wall outlet, connect the speaker system to the receiver (page 15).
Connect the AC power cord(s) of your audio/ video components to a wall outlet.
If you connect other audio/video components to the AC OUTLET(s) on the receiver, the receiver will supply power to the connected component(s), allowing you to turn the whole system on or off when you turn the receiver on or off.
Caution
Make sure that the total power consumption of the component(s) connected to the receiver’s AC OUTLET(s) does not exceed the wattage stated on the rear panel. Do not connect