Selecting the component (continued)
MUTING
Press MUTING on the remote to mute the sound. Press again to cancel the muting function. The muting function is also canceled when you turn the power on or turn the MASTER VOLUME to turn the volume up.
PHONES
Use to connect headphones.
•When the headphones are connected, speaker output is automatically canceled and “SP A” and “SP B” do not light up in the display.
•When the headphones are connected, selectable sound fields are HP 2CH, HP MULTI or HP THEA (page 28).
SPEAKERS (OFF/A/B/A+B)
Press SPEAKERS (OFF/A/B/A+B) to output the sound from the speakers connected to the SPEAKERS FRONT terminals.
Each time you press the button, the display will light up cyclically as follows:
SP A tSP B tSP A and SP B t No display*
To drive | Select |
Speaker System A | SP A (default setting) |
(Connected to the |
|
SPEAKERS FRONT A |
|
terminals) |
|
|
|
Speaker System B | SP B |
(Connected to the |
|
SPEAKERS FRONT B |
|
terminals) |
|
|
|
Both Speaker System A | SP A and SP B |
and B (Connected to the |
|
SPEAKERS FRONT A |
|
and B terminals) |
|
|
|
*If you do not want to drive Speaker System A and B, press SPEAKERS (OFF/A/B/A+B) until “SP A” and “SP B” do not light up in the display (no display).
Changing the display
DIMMER
Press DIMMER repeatedly to adjust the brightness of the display (3 steps).
DISPLAY
Each time you press DISPLAY, the display changes cyclically as follows:
Index name of the component* tSelected component tSound field applied to the program source
When the tuner is selected
Index name of the preset station* or program station name** tFrequency tProgram type indication** tRadio text** tCurrent time** tSound field applied to the band or the preset station
*Index name appears only when you have assigned one to the component or preset station (page 39). Index name does not appear when only blank spaces have been entered, or it is the same as the input selector.
**During RDS reception only. (Models of area code CEL, CEK only. See page 37.)