Other Operations
Naming preset stations
and program sources
You can enter a name (index name) of up to 8 characters for preset stations and program sources. These names (for example, “VHS”) appear in the receiver’s display when a station or program source is selected. Note that no more than one name can be entered for each preset station or program source.
This function is useful for distinguishing components of the same kind. For example, two VCRs can be specified as “VHS” and “8MM”, respectively. It is also handy for identifying components connected to jacks meant for another type of component, for example, a second CD player connected to the MD/TAPE jacks.
1 To name a preset station
Press TUNER FM/AM, then tune in the preset station you want to create an index name for.
If you are not familiar with how to tune in preset stations, see “Tuning to preset stations” on page 36.
To name a program source
Select the program source (component) to be named.
2 Press MAIN MENU repeatedly to select
“CUSTOM ”.
3 Press or repeatedly to select “NAME IN”.
4 Create an index name by using the jog dial and or :
Turn the jog dial to select a character, then press to move the cursor to the next position.
Note
(Models of area code CEL, CEK only)
You cannot change the name of an RDS station.
Recording
Before you begin, make sure you’ve connected all components properly.
Recording on an audio tape or MiniDisc
You can record on a cassette tape or MiniDisc using the receiver. See the operating instructions of your cassette deck or MD deck if you need help.
1 Select the component to be recorded.
2 Prepare the component for playing.
For example, insert a CD into the CD player.
3 Insert a blank tape or MD into the recording deck and adjust the recording level, if necessary.
4 Start recording on the recording deck, then start playback on the playback component.
continued
Operations Other