For example, insert the DVD you want to record into the DVD player.
3 Insert a blank video tape into the VCR (VIDEO 1) for recording.
4 Start recording on the recording VCR,
then start playing the video tape or DVD you want to record.
Tip
You can record the sound from any audio source onto a video tape while copying from a video tape or DVD. Locate the point where you want to start recording from another audio source, select the program source, then start playback. The audio from that source will be recorded onto the audio track of the video tape instead of the audio from the original medium. To resume audio recording from the original medium, select the video source again.
Select the program source to be recorded.
Prepare the component for playing.
1
2
Recording (continued)
Notes
• Sound adjustments do not affect the signal output from the MD/TAPE OUT jacks.
• The analog audio signals of the current input source is output from the REC OUT jacks.
• When MULTI CH IN is selected, the analog audio signals of the current input source is output from the REC OUT jacks.
• You cannot record a digital audio signal using a component connected to the analog MD/TAPE OUT jacks. To record a digital audio signal, connect a digital component to the DIGITAL MD/ TAPE OUT jacks.
• Some sources contain copy guards to prevent recording. In this case, you may not be able to record from the sources.
• When MULTI CH IN is selected, no signals are output from DIGITAL OUT jacks (MD/TAPE
OPTICAL OUT).
Recording on a video tape
You can record from a VCR, a TV or a DVD player using the receiver. You can also add audio from a variety of audio sources when editing a video tape. See the operating instructions of your VCR or DVD player if you need help.

Notes

Make sure to make both digital and analog connections to the VIDEO 2 and DVD inputs. Analog recording is not possible if you make only digital connections.

When MULTI CH IN is selected, the analog audio signals of the current input source is output from the REC OUT jacks.

Using the Sleep Timer

You can set the receiver to turn off automatically at a specified time.

Press SLEEP on the remote while the power is on.

Each time you press the button, the display changes cyclically as follows:

2-00-00 t1-30-00 t1-00-00 t0-30-00

tOFF

Tips

(RM-PP412 only) Press ALT before you press SLEEP (page 47).

To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears in the display.

40GB