Sony STR-DE905G manual 20EN, If the program source is a Sony product

Preparing and Using the Remote

3Click the appropriate function.

IR CODE SETTING
VIDEO	1	Sony	VTR3
VIDEO	2	Sony	VTR1
VIDEO	3	Sony	VTR2
LD		Sony	LD
TV/DBS		Sony	DBS
DAT/MD		Sony	DAT
CD		Sony	CD1
TAPE		Sony	TAPE
RETURN			EXIT

4Click “Sony” for a Sony product or OTHER for a non-Sony product.

IR CODE SETTING
MAKER	Sony	OTHER
OUTPUT	IR
RETURN		EXIT

If the program source is a Sony product

The IR codes are programed automatically and registration is complete (click RETURN or EXIT).

To take advantage of CONTROL-A1 compatible audio components, such as multi-disc CD players, click CONTROL-A1 to select CONTROL-A1.

5Click the respective program source.

IR CODE SETTING
MAKER	Sony	OTHER
OUTPUT	IR
VCR	TV	TAPE
	LD	DAT
	CD	MD
RETURN		EXIT

If the equipment is not a video deck or laser disc player

Cover the IR sensor on the equipment to prevent accidental operation during the programing procedure, click START, then go to step 6.

IR CODE SETTING
MAKER	Sony	OTHER
OUTPUT	IR
VCR	TV	TAPE
	LD	DAT
	CD	MD
RETURN	START	EXIT

If the equipment is a video deck or laser disc player:

1Click START.

A list of other manufacturers appears.

2Click the manufacturer of the respective equipment and the IR codes for that program source are registered automatically. (If the manufacturer is not listed, cover the IR sensor on the equipment to prevent accidental operation during the programing procedure, click “OTHER”, then go to step 6).

3Click TEST.

If the selected program source turns on, it means the IR codes have been registered. This ends the procedure.

If the program source does not turn on, click the number button beside the manufacturer’s name to select another number, then click TEST again. If the program source still does not turn on, cover the IR sensor on the equipment to prevent accidental operation during the programing procedure, click “OTHER”, then go to step 6.

When using a video deck from another manufacturer (Australian, Malaysian, and Singaporean models)

Check to see if the supplied remote uses -/-- or 1- and 2- buttons to enter 2 digit TV channels.

Since the -/-- or 1- and 2- codes are not pre- programmed in this unit, do the following operations to program these codes manually.

1Select the manufacturer (as shown in step 2 above).

2Click -/-- 2- CODE SET.

VCR		MAKER	SETTING
EMERSON		1 2 3 4	AKAI	1 2
FISHER		1 2 3 4	GE	1 2
PANASONIC		1 2	JVC	1 2
TOSHIBA		1 2	RCA	1 2
MISTUBISHI		1 2 3	SANYO	1 2
GRUNDIG			SHARP
HITACHI			ZENITH
PHILIPS			OTHER
– / – –	2 –	CODE SET
RETURN		TEST		EXIT

20EN