Performing Initial Setup Operations
System Speaker the Up Setting and Up Hooking
Once you have hooked up the speakers and turned on the power, clear the receiver’s memory. Then specify the speaker parameters (size, position, etc.) and perform any other initial setup operations necessary for your system.
Clearing the receiver’s memory
Before you use your receiver for the first time or when you want to clear the receiver’s memory, do the following. This procedure is not necessary if the demonstration activates when you turn the power on.
1/u
|
|
|
|
|
|
|
| MULTI CHANNEL DECODING |
|
|
|
| MASTER VOLUME |
? / 1 |
|
|
|
|
|
|
|
|
|
|
| + | |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| – |
|
SPEAKERS | DISPLAY |
|
|
|
|
|
| LEVEL |
|
|
|
|
|
|
|
|
|
|
|
| SURR | SET UP |
|
|
| MUTING |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| DIMMER | PRESET |
|
|
| EQ |
| NAME | CINEMA STUDIO EX |
| DIGITAL CONCERT HALL 6.1 CH DECODING |
| |
| – TUNING + | – | TUNING | + |
| B | C | A | B | FUNCTION | |||
PHONES |
|
|
|
|
|
|
| A | |||||
|
|
|
|
|
|
|
|
|
|
|
| INPUT MODE | 2ND ROOM |
| ON SCREEN | MEMORY SHIFT | FM MODE | FM | AM |
|
|
| SOUND FIELD |
| MULTI /2CH A. DIRECT |
| |
|
|
|
|
|
|
|
| EQUALIZER |
| ||||
VIDEO 3 INPUT |
|
|
|
|
|
|
| A.F.D. | MODE | 2CH |
| MODE |
|
|
|
|
|
|
|
|
| ENTER |
|
|
|
|
|
VIDEO | L AUDIO R |
1Turn off the receiver.
2Hold down ?/1 for five seconds.
The currently selected function, then the demonstration message appears in the display and the items including the following are reset or cleared:
•All preset stations are reset or cleared.
•All sound field parameters are reset to their factory settings.
•All index names (of preset stations and program sources) are cleared.
•All SET UP parameters are reset to their factory settings.
•The sound field memorized for each program source and preset stations are cleared.
•The master volume is set to VOLUME MIN.
Performing initial setup operations
Before using your receiver for the first time, adjust SET UP parameters so that the receiver correspond to your system. For the adjustable parameters, see the table on page 62. See pages 19 – 23 for speaker settings and pages 51 – 52 for other settings.
Demonstration Mode
The demonstration will activate the first time you turn on the power. When the demonstration starts, the following message appears in the display twice:
“Now Demonstration Mode!! To finish the demonstration, please press POWER KEY while this message appears in the display. Thank you!”
To cancel the demonstration
Press ?/1 to turn the receiver off while the above message is being displayed. The next time you turn the receiver on, the demonstration will not appear.
To view the demonstration
Hold down SET UP and press ?/1 to turn on the power.
Notes
•Running the demonstration will clear the receiver’s memory. For details on what will be cleared, see “Clearing the receiver's memory” on this page.
•You cannot cancel demonstration if you did not press ?/1 while the above message is being displayed. To cancel demonstration after the above message appears, press ?/1 twice to activate the demonstration again. Then, press ?/1 while the above message is being displayed.
18