Remote Button | Operations | Function | |
|
|
|
|
TAPE | Receiver | To listen to audio tape. | |
|
|
|
|
MD/DAT | Receiver | To listen to Minidisc or | |
|
|
| DAT. |
|
|
|
|
MACRO 1 | Receiver | To perform several | |
|
|
| commands in sequence |
MACRO 2 |
| ||
| automatically. | ||
|
|
|
|
Notes
•Some functions explained in this section may not work depending on the model of the receiver.
•The above explanation is intended to serve as an example only. Therefore, depending on the component the above operation may not be possible or may operate differently than described.
•The /10, /11, /12, 3RD, NIGHT MODE and AUDIO SPLIT functions are not available for set operation.
Selecting the mode of the remote
Set the remote mode using the USE MODE button and the remote mode buttons.
|
|
| AV | ? / 1 | |
SLEEP |
|
| ? / 1 |
| |
|
| USE MODE | SYSTEM |
| |
|
|
| STANDBY |
| |
VIDEO 1 | VIDEO 2 | VIDEO 3 | DVD/LD | TV/SAT | |
AUX | MD/TAPE | CD/SACD | TUNER | PHONO | |
MONITOR | AV1 | AV2 | 3RD | 2ND ROOM | |
1 | 2 | 3 | |||
| (SOURCE) | ||||
|
|
|
| ||
TV/VIDEO | 4 | 5 | 6 | INPUT MODE | |
SEARCH | AUDIO | ||||
|
|
| |||
MODE | 7 | 8 | 9 | SPLIT | |
WIDE |
| ||||
|
| ENTER | ANT | ||
CLEAR | SHIFT | 0 | TV/VTR | ||
>10 |
| DISC | |||
D.TUNING | /11 | /10 | /12 | JUMP | |
– SUB CH + | POSITION | SWAP |
| ||
m | M | . | > |
| |
– VOL + |
|
| D. SKIP/ | ||
MUTING | P IN P CH/PRESET | ||||
n | N | X | x |
| |
A.F.D. | SOUND FIELD | PRESET | |||
MODE | 2CH | ||||
AV | TEST | NIGHT | EQ/TONE | MULTI/2CH | |
DISPLAY | TONE | MODE | A. DIRECT | ||
TITLE |
| AV | ON | MUTING | |
GUIDE |
| MENU | SCREEN | ||
|
|
|
| MASTER | |
|
|
| MAIN | VOL | |
|
|
| MENU |
|
ENTER/
EXEC
EXIT/
RETURN
Selecting the command mode
You can switch the command mode (AV1 or AV2) of the remote. If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver.
Press 1 (AV1) (or 2 (AV2)) while pressing down USE MODE.
The indicator lights once (twice for AV2), then the command mode switches.
Setting to the 2nd room mode.
You can use the remote to select the function for the 2nd room (2nd room mode). You can use the function buttons only for the 2nd room.
Press 2ND ROOM while pressing down USE MODE.
The indicator lights for a while, then the mode switches to the 2nd room mode.
Tips
•If you press a function button while pressing down 2ND ROOM, you can select the function for the 2nd room even though the mode is not set to the 2nd room mode.
•If you press 2ND ROOM only, you can output the source signal of the current function of the receiver to the amplifier in the 2nd room.
To check the mode of the remote
Press USE MODE. You can check the remote by the indicator.
Mode | Indicator lights |
|
|
AV1 | once |
|
|
AV2 | twice |
|
|
2nd room | once (for a while) |
| |
|
|
To reset the remote to factory settings
Press ?/1, AV ?/1, and MASTER VOL – at the same time.
The indicator lights 3 times, then goes off.
Information Additional
65