Operations Other

Adjustment Using the SET UP Button

Selecting the command mode of the

remote

Lets you select the command mode of the remote. Change the command mode when you use 2 Sony receivers in the same room. The default setting is “AV1”. For details, see “Selecting the mode of the remote” on page 65.

1Press SET UP.

2 Press the cursor buttons ( or ) to select “COMMAND MODE”.

3Turn the jog dial to select “AV1” or “AV2”.

Selecting the color of the on-screen

display (STR-DE975 only)

Select the color of the on-screen display. You can select either “COLOR” or “MONOCHROME”. The default setting is “COLOR”.

1Press SET UP.

2 Press the cursor buttons ( or ) to select “OSD”.

3Turn the jog dial to select “COLOR” or “MONOCHROME”.

OSD horizontal position (STR-DE975 only)

This parameter lets you adjust the position of the on-screen display horizontally. The default setting is “4”.

1Press SET UP.

2 Press the cursor buttons ( or ) to select “OSD H. POSITION”.

3Turn the jog dial to select 0-64.

OSD vertical position (STR-DE975 only)

This parameter lets you adjust the position of the on-screen display vertically. The default setting is “4”.

1Press SET UP.

2 Press the cursor buttons ( or ) to select “OSD V. POSITION”.

3Turn the jog dial to select 0-32.

52