System Speaker the Up Setting and Up Hooking

Before You Use Your Receiver

Checking the connections

After connecting all of your components to the receiver, do the following to verify that the connections were made correctly.

1/u

 

 

 

 

 

 

 

 

 

 

 

 

MASTER VOLUME

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MULTI CHANNEL DECODING

 

 

 

 

MASTER VOLUME

? / 1

 

 

 

 

 

 

 

 

 

 

 

 

+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SPEAKERS

DISPLAY

 

 

 

 

 

 

 

LEVEL

 

 

 

 

 

 

 

 

 

 

 

 

 

SURR

SET UP

 

 

 

MUTING

 

 

DIMMER

PRESET

+

 

 

+

EQ

 

NAME

CINEMA STUDIO EX

 

DIGITAL CONCERT HALL 6.1 CH DECODING

 

 

– TUNING

TUNING

 

B

C

A

B

FUNCTION

PHONES

 

 

 

 

 

 

 

 

A

 

 

 

 

 

 

 

 

 

 

 

 

 

INPUT MODE

2ND ROOM

 

ON SCREEN

MEMORY SHIFT

 

FM MODE

FM

AM

 

 

 

SOUND FIELD

 

MULTI /2CH A. DIRECT

 

 

 

 

 

 

 

 

 

 

EQUALIZER

 

VIDEO 3 INPUT

 

 

 

 

 

 

 

 

A.F.D.

MODE

2CH

 

MODE

 

 

 

 

 

 

 

 

 

 

ENTER

 

 

 

 

 

VIDEO L AUDIO R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FUNCTION

1Press ?/1 to turn on the receiver.

2Turn on the component that you connected (e.g., CD player or tape deck).

3Rotate FUNCTION to select the component (program source) and start playing it.

4Rotate MASTER VOLUME to turn up the volume.

If you do not obtain normal sound output after performing this procedure, look for the reason in the following checklist and take the appropriate measures to correct the problem.

There is no sound no matter which component is selected.

,Check that both the receiver and all components are turned on.

,Check that the volume level on the display is not set to VOLUME MIN by turning the MASTER VOLUME.

,Press SPEAKERS button if SP. OFF appears on the display.

,Check that all speaker cords are connected correctly.

,Press MUTING if MUTING appears on the display.

,Check that the headphones are not connected to the PHONES jack. No sound will come from the speakers if the headphones are connected.

,Check that the receiver is not in “Demonstration Mode” (see page 18).

There’s no sound from a specific component.

,Check that the component is connected correctly to the audio input jacks for that component.

,Check that the cord(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the component.

No sound is heard from one of the front speakers.

,Connect a pair of headphones to the PHONES jack to verify that sound is output from the headphones (see “wh SPEAKERS button” and “PHONES jack” on page 29).

If only one channel is output from the headphones, the component may not be connected to the receiver correctly. Check that all the cords are fully inserted into the jacks on both the receiver and the component.

If both channels are output from the headphones, the front speaker may not be connected to the receiver correctly. Check the connection of the front speaker which is not outputting any sound.

If you encounter a problem that is not included above, see “Troubleshooting” on page 55.

24