Information Additional
Specifications
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Sensitivity Mono: 18.3 dBf,
2.2µV/75 ohms
Stereo: 38.3 dBf
22.5µV/75 ohms
Usable sensitivity
11.2 dBf, 1 µV/75 ohms
S/N | Mono: 76 dB |
| Stereo: 70 dB |
Harmonic distortion at 1 kHz
Mono: 0.3%
Stereo: 0.5%
Separation 45 dB at 1 kHz
Frequency response
30 Hz - 15 kHz
Selectivity 60 dB at 400 kHz
AM tuner section
Tuning range With
530 - 1710 kHzc) With
scale:
531 - 1710 kHzc)
Antenna | Loop antenna |
Intermediate frequency
450 kHz
Usable sensitivity
50 dB/m (at 1,000 kHz or 999 kHz)
S/N | 54 dB (at 50 mV/m) |
Harmonic distortion
0.5% (50 mV/m, 400 Hz)
Selectivity At 9 kHz: 35 dB At 10 kHz: 40 dB
c)You can change the AM tuning interval to 9 kHz. After tuning in any AM station, turn off the receiver. Hold down the PRESET TUNING + button and press the ?/1 button. All preset stations will be erased when you change the tuning interval. To reset the scale to 10 kHz, repeat the procedure.
Video section
Inputs | Video: 1 |
| |
| Y: 1 |
| C: 0.286 |
Outputs Video: 1
Y:1
C:0.286
General
System Tuner section:
PLL
Preamplifier section:
Power amplifier section:
SEPP
Power requirements
120 V AC, 60 Hz
Power consumption
Models of area code U:
In standby condition: 0.9 W
Models of area code CA:
In standby condition: 0.9 W
AC outlets 2 switched, total 120 W/1A Max
Dimensions 430 × 157.5 × 369 mm (17 × 6 1/8 × 14 4/8 in.) including projecting
parts and controls
Mass (Approx.)
9.5 kg (20 lbs. 16 oz.)
Supplied accessories
See page 4.
For details on the area code of the component you are using, see page 3.
Design and specifications are subject to change without notice.
58