Models of area code AR, KR
Stereo Power Output1), Reference Power Output1)2)
8 ohms 20 Hz – 20 kHz, THD 0.09%
85 W + 85 W1),
70 W + 70 W3), 110 W/ch
8 ohms 1 kHz, THD 0.7%
100 W + 100 W1),
90 W + 90 W3), 120 W/ch
8 ohms 1 kHz, THD 10%
125W + 125 W1),
110W + 110 W3),
150W/ch
Models of area code TH6
Stereo Power Output1), Reference Power Output1)2)
8 ohms 20 Hz – 20 kHz, THD 0.09%
70 W + 70 W1),
60 W + 60 W3), 90 W/ch
8 ohms 1 kHz, THD 0.7%
80 W + 80 W1),
70 W + 70 W3), 100 W/ch
8 ohms 1 kHz, THD 10%
100 W + 100 W1),
90W + 90 W3), 125 W/ch
1)Measured under the following conditions:
Area code | Power requirements |
U, CA | 120 V AC, 60 Hz |
|
|
CEL, CEK, AR, KR, | 230 V AC, 50 Hz |
TH6, SP |
|
|
|
E2, AU | 240 V AC, 50 Hz |
|
|
TW | 110 V AC, 60 Hz |
|
|
2)Reference power output for front, center, surround and surround back. Depending on the sound field settings and the source, there may be no sound output.
3)Measured under the following conditions:
Area code | Power requirements |
AR, KR, TH6 | 220 V AC, 50 Hz |
|
|
Frequency response |
|
Analog | 10 Hz – 70 kHz |
| |
| field and tone bypassed) |
Inputs |
|
Analog | Sensitivity: 500 mV/ |
| 50 kohms |
| S/N4): 96 dB |
| (A, 500 mV5)) |
Digital (Coaxial) | Impedance: 75 ohms |
| S/N: 100 dB |
| (A, 20 kHz LPF) |
Digital (Optical) | S/N: 100 dB |
| (A, 20 kHz LPF) |
Outputs (Analog) |
|
AUDIO OUT | Voltage: 500 mV/10 kohms |
SUB WOOFER | Voltage: 2 V/1 kohm |
Tone |
|
Gain levels | ±6 dB, 1 dB step |
4)INPUT SHORT (with sound field and tone bypassed).
5)Weighted network, input level.
FM tuner section
Tuning range | 87.5 - 108.0 MHz |
Intermediate frequency | |
| 10.7 MHz |
Useable sensitivity | 11.2 dBf, 1 µV/75 ohms |
S/N |
|
Mono/Stereo | 76 dB/70 dB |
Harmonic distortion at 1 kHz | |
Mono/Stereo | 0.3%/0.5% |
Separation | 45 dB at 1 kHz |
Frequency response | 30 Hz – 15 kHz, |
|
72GB