Speaker installation options
∫Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
≥The wall or pillar on which the speakers are to be attached should be capable of supporting over 10 kg per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.
≥When mounting the front speakers or surround speakers ([HT540] front speakers only) to a wall, we recommend using a string (not included) to prevent it from falling.
[HT540] 2 Screws | [HT540] 2 Cover plates |
[HT990] 4 Screws | [HT990] 4 Cover plates |
|
|
Preparation for front speakers and surround speakers ([HT540] front speakers only)
1 Remove the speaker cable from the stand.
Release the cable from the groove.
2 Connect the cable (➜ page 7).
Speaker installation options
RQT8722
1Attach the cover plate to the front speaker or surround speaker ([HT540] front speaker only).
2 Screw
Tighten securely.
1
Cover plate
2Drive a screw (not included) into the wall.
‰4.0 mm ‰7.5 to 9.5 mm
Wall or pillar | 5.0 to 7.0 mm |
|
3Fit the speaker securely onto the screw(s) with the hole(s).
Front speaker [HT540] | Center speaker |
Front and surround speakers [HT990] |
|
106 mm 200 mm
340 mm
Surround speaker
[HT540]
e.g.
In this position, |
|
|
| Move the |
the speaker will |
|
|
| speaker so that |
likely fall if moved |
|
|
| the screw is in |
to the left or right. |
|
|
| this position. |
38