Panasonic SC-HT540, SC-HT990 Preparing the remote control, Performing Quick Setup, Use

STEP6 Preparing the remote control

Simple Setup

Remote control Batteries

2Insert so the poles (i and j) match those in the remote control.

3

Do not:

≥mix old and new batteries.

≥use different types at the same time.

≥heat or expose to flame.

≥take apart or short circuit.

≥attempt to recharge alkaline or manganese batteries.

≥use batteries if the covering has been peeled off. Mishandling of batteries can cause electrolyte leakage which can severely damage the remote control.

Remove the batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

QUICK SETUP

R6/LR6, AA

1 ≥Do not use rechargeable type batteries.

∫Use

Aim at the remote control signal sensor (➜ page 15), avoiding obstacles, at a maximum range of 7 m directly in front of the unit.

the remote control / Performing

STEP7 Performing QUICK SETUP

The QUICK SETUP screen assists you to make necessary settings.

To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.).

≥To change your television’s video input mode, refer to its operating instructions.

≥This remote control can perform some basic television operations (➜ page 37).

1 Turn on the unit.

Preparing

DVD

2

3

Select “DVD/CD”.

Press and hold to show the QUICK SETUP screen.

4	Select	Follow the messages
		and make the settings.

ENTER		Register
	RETURN

SETUP

RQT8722

5	Press to finish QUICK
ENTER	SETUP.
6	Press and hold to exit.

To change these settings later

Select “QUICK SETUP” in the “Others” tab (➜ page 30).

14