Panasonic SC-HT990 Enhancing the bass sound: H.BASS, Enhancing the surround sound effect, effects

Enhancing the bass sound: H.BASS

You can enhance low-frequency sound so that heavy bass sound can be heard clearly, even if the acoustics of your room are not optimal. The unit automatically selects the most suitable setting according to the type of playing source.

Press [-H.BASS].ST SRD E.

	HDCD
	H.BASS
≥[DVD-V] [DVD-VR]	W PGM
	1
H.BASS ON (factory preset),------.H.BASS OFF

≥When another source is selected

H.BASS OFF (factory preset),------.H.BASS ON

The setting you make is retained, and recalled every time you play from the same type of source.

[HT990]

Enhancing the surround sound effect:

Surround Enhancer

Press and hold [—SRD ENH].

SRD E.

Each time you press and hold the button:

Adjusting the volume of each speaker:

Speaker level adjustments

This is one of the ways to get appropriate surround effects.

Preparation

Press [DVD].

1 While stopped and no on-screen display is shown

Press and hold [—TEST] to output a test signal.

≥To stop the test signal, press and hold [—TEST] again.

L: Front left	C:	Center	R: Front right
RS: Right surround		LS: Left surround

≥There is no output from SW (subwoofer) channel.

2	Press [VOLUME, r] or [s] to set the volume
	level normally used for listening.
3	Press [3] (increase) or [4] (decrease) to
	adjust the speaker level for each speaker.
	≥Adjust the speaker levels to the same level as the
	front speakers.	effects
	C, RS, LS: `6 dB to i6 dB

SRD ENH ON,------.SRD ENH OFF

W

∫ To adjust speaker level during play		sound
[Effective when playing multi-channel audio or when
Dolby Pro Logic II or Sound Field Control (MOVIE,
		Using
SPORT or MUSIC) is on.]
1 Press [CH SELECT] to select the speaker.
L #C #R #RS #LS #SW
^----------------------------------------------	}

SW: Subwoofer

≥You can adjust SW only if the disc includes a subwoofer channel.

≥“SW” does not appear on the display and is not adjustable when “ÎPLII” is lit.

≥“S” appears on the display when “MOVIE”, “SPORT” or “MUSIC” is selected with Sound Field Control (➜ page 34).

In this case, you can adjust both surround speaker levels at the same time using [3, 4].

S: `6 dB to i6 dB

2Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker. C, RS, LS, SW: `6 dB to i6 dB

(L, R: Only the balance is adjustable.)

≥To adjust the balance of the front speakers, while “L” or “R” is selected, press [2, 1].

RQT8722

35