Reattaching the speaker cable to the stand
1Remove the eight screws from the stand, and remove the speaker net.
Screw
2 Position the cable.
Approx. 15 cm
Press the cable into the groove.
Cable
3 Attach the speaker net with the screws.
∫Fitting speaker stands (not included)
[Except front speakers ([HT540] [HT990]) and surround speakers ([HT990])]
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between screws as shown in the diagram.
≥The stands must be able to support over 10 kg.
≥The stands must be stable even if the speakers are in a high position.
e.g. Center speaker
Metal screw holes For attaching to speaker stands
5 mm, pitch 0.8 mm
Plate thickness
plus 7 mm to 10 mm
60 mm
Speaker stand
(not included)
Speaker installation options
RQT8722
39