![Assembled!](/images/new-backgrounds/11548/1154813x1.webp)
Speaker
Stand
Simple Setup
Assembled!
Cover plate
Remove before attaching the speaker and keep for wall- mount use (➜ page 38).
4Secure the speaker to the stand.
Speaker |
|
| Screw |
| Tighten securely. |
| Ensure the speaker cable is |
Stand | centered in the groove. |
|
5Connect the speaker cable.
Insert the wire fully.
_: White
`: Blue
Push!
Press the speaker cable
into the groove.
Assembling the speakers
∫Preventing the speakers from falling
≥You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened.
≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers.
String (not included) |
| |
Thread from the wall to the | Wall | |
speaker and tie tightly. | ||
|
Approx. 150 mm
Rear of the | Screw eye |
speaker | (not included) |
RQT8722
7