Panasonic SC-HT540, SC-HT990 operating instructions Assembling the speakers

Simple Setup

Assembling the speakers

STEP1 Assembling the speakers	The supplied stands are specially designed
	speakers, SB-FS741 surround speakers,
	for attachment to Panasonic SB-FS990 front
	SB-FS540 front or surround speakers.
	Use only as indicated in this setup.

[HT540] Front speakers

[HT990] Front and surround speakers

Preparation

≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.

≥For assembly, use a Phillips-head screwdriver.

≥Make sure you have all the indicated components before starting assembly, setup, and connection.

≥There is no difference between the right and left speakers and stands.

≥For optional wall mount, refer to page 38.

[Note]

≥[HT990] The front and surround speakers are different.

–Check the label on the rear of speaker before attaching the stand (➜ page 8).

–The stand with shorter cable is for the front speaker.

[HT540] 2	Front speakers	[HT540] 2	Stands (with cable)	[HT540] 2 Bases	[HT540] 8 Screws
(with cover plate)		[HT990] 4	Stands	[HT990] 4 Bases	[HT990] 16 Screws
[HT990] 2	Front speakers and	≥2kstands with short cable:
2	Surround speakers	For front speakers
(with cover plate)		≥2kstands with long cable:
		For surround speakers

1Attach the stand to the base.

1 Thread the speaker cable through the base. For quicker threading, loosely fold the cable in half (do not crease), pass the folded portion through the hole, and then pull the rest of the cable through the base.

Cable

Base

2Attach the stand to the base while gently pulling on the end of the speaker cable.

Stand

2Secure the stand to the base.

Screw

Tighten securely.

Stand

Base

Slide the speaker cable into the

Screws groove.

Tighten securely.

3Attach the speaker to the stand.

1 Pull out the end of the speaker cable and position it between the ridges.

Ridges

Cable

Stand

RQT8722

Base 2 Attach the speaker to the stand.

Cable

Pull gently.

6