130US
The Control for HDMI function does not
work.
• Check the HDMI connection (page 26).
•M ake sure “Ctrl for HDMI” is set to “ON”
in HDMI Settings menu.
• Make sure the connected component is
compatible with the C ontrol for HDMI
function.
• Check the Control for HDMI settings on
the connected component. Refer to the
operating instructions of the connected
component.
• If you change the HDMI connection,
connect/disconnect the AC power cord, or
there is a power failure, repeat the
procedures of “Preparing for the
“BRAVIA” Sync” (page 94).
No sound is output from the receiver
and TV speaker while using the System
Audio Control function.
• Make sure the T V is compatible wi th the
System Audio Control function.
• If the TV does not have System Audio
Control function, set the “Audio Out”
settings in HDMI Settings menu to
– “TV+AMP” if you want to listen to the
sound from the TV speaker and
receiver.
– “AMP” if you want to listen to the
sound from the receiver.
• If you cannot listen to the sound of a
component connected to the receiver
while TV input is selected on the receiver
– Select the appropriate input when you
want to watch a program on a
component connected via HDMI
connection to the receiver.
– Change the TV channel when you want
to watch a TV broadcast.
– Select the component or input you want
to watch when you watch a program on
the component connected to the TV.
Refer to the operating instructions of the
TV on this operation.
The TV’s remote cannot be used to
control the connected component
when using the Control for HDMI
function.
•Depending on the connected component
and TV, you may need to set up the
component and TV. Refer to the operating
instructions supplied with each component
and TV.
•Change the input of the receiver to the
HDMI input connected to the component.
S-AIR connection is not established
(sound transmission is not
established), e.g., the indicator of the
S-AIR sub unit turns off, flashes, or
turns red.
•If you use another S-AIR main unit, place
it more than 26 1/4 feet (8 m) away from
this S-AIR main unit.
•C onfirm the S-AIR IDs of th e S-AIR main
unit and S-AIR sub unit are the same (page
100).
•A nother S-AIR sub unit is paired to th e
S-AIR main unit. Pair the desired S-AIR
sub unit with the S-AIR main unit (page
102).
•The S-AIR main unit is pairing with
another S-AIR sub unit. Cancel pairing.
•P lace the S-AIR main uni t and S-AIR sub
unit separately from other wireless
devices.
•Avoid using any other wireless devices.
•The S-AIR sub unit is turned off. Make
sure the AC power cord (mains lead) is
connected and turn on the S-AIR sub unit.
No sound is heard from the S-AIR
receiver.
•Check that the components are connected
to analog jack of thi s receiver.
S-AIR function