72US
Settings for the Auto Calibration

(Auto Calibration menu)

You can make settings for the Auto
Calibration function to suit your preference.
xAuto Cal. Start (Auto Calibration
start)
Lets you perform Auto Calibration. For
details, see “Performing Auto Calibration”
(page 41).
xAuto Cal. Type (Calibration type)
Lets you select the Auto Calibration type for
each seating position. For details, see step 4 of
“Confirming/saving the measurement results”
(page 42).
Note
You can select this parameter only when you have
performed the Auto Calibration and saved the
measurement result.
xPosition (Position)
You can select the seating position you want
and register the measurement results of the
Auto Calibration for that seating position.
You can register 3 patterns as Position 1, 2,
and 3, depending on the listening position,
listening environment, and measurement
conditions.
To register more than one set of
settings for the listening
environment
You can select the seating position you want
and register the measurement results of the
Auto Calibration for that seating position.
1Press V/v repeatedly to select
“Position”, then press or b.
2Press V/v repeatedly to select the
position (Position 1, 2, 3) for which you
want to register the measurement
result, then press .
3Press V/v repeatedly to select “Auto
Cal. Start”, then press or b.
The measurement re sults is register ed as
the position you selected in step 2.
4Press to select “START”.
5Repeat step 1 to 3 to register another
seating position.
To select the registered seatin g
position
1Press V/v repeatedly to select
“Position”, then press .
2Press V/v repeatedly to select the
position (Position 1, 2, 3) you want,
then press .
The registered seating position is selected.
xName Input (Naming position)
You can rename the position name.
To name the position name
1Select the “Position” for which you want
to name.
2Press V/v repeatedly to select “Name
Input”, then press .
3Press V/v/B/b to select a character,
then press .
The name you entered is registered.

Auto Calibration menu

parameter