43US
Getting Started
*When the speaker(s) is (are) out of the phase,
“OUT” is displayed on the TV screen. The
“+” and “–” terminals of the speaker may be
connected the other way around.
However, depending on the speakers, “OUT”
appears on the TV screen even though the
speakers are connected properly. This is
because of the speakers’ specifications. In
this case, you can continue to use the
receiver.
3Select “Save” in step 2 to save

the measurement result.

4Press V/v repeatedly to select

the Auto Calibration Type, then

press .
Tip
The size of a speaker (“Large”/“Sma ll”) is
determined by the low frequency characteristics.
The measurement results may vary, depending on
the position of the optimizer mic rophone and
speakers, and the shape of the room. It is
recommended that you follow the measurement
results. However, you can chan ge those settings in
the Speaker Settings menu. Save the measurement
results first, then try to change the settings if you
want.
Distance Displays the measurement
result for speaker distance.
Level Displays the measurement
result for speaker level.
Exit Exits the setting process
without saving the
measurement results.
Parameter Explanation
Full Flat M akes the measu rement of
frequency from each speaker
flat.
Engineer Sets the frequency to one that
matches that of the Sony
listening room standard.
Front
Reference
Adjusts the characteristics of
all the speakers to match the
characteristics of the front
speaker.
Off Se ts the Auto Calibration to
off.
Item Explanation
Auto Cal. Type
Engineer
Front Reference
Off
Auto Calibration
RETURN
Full Flat