Manuals / Brands / Home Audio / Stereo Receiver / Sony / Home Audio / Stereo Receiver

Sony STR-DN1000 Changing the display Performing Auto Calibration

1 136

Download 136 pages, 2.23 Mb

88US

You can check the sound field, etc., by

changing the information on the display.

Press DISPLAY repeatedly.

Each time you press DISPLAY, the display

will change cyclically as follows.

All inputs except the FM and AM

band

Input name you selected* t Original input

name t Sound field currently applied t

Volume level t Stream information

FM and AM band

Preset station name* t Frequency t Sound

field currently applied t Volume level

SIRIUS Satellite Radio

Channel name t Channel number t

Category name t Artist name/Feature t

Song/program title t Composer name t

Signal strength t Sound field type t

Volume level

*Index name appears only when you have assigned

one to the input or preset station (page 49, 55).

Index name does not appear when only blank

spaces have been entered or it is the same as the

input name.

Note

Character or marks may not be displayed for some

languages.

Tip

You cannot switch the display while “GUI” is shown

on the display. Press GUI MODE repeatedly to

select “MENU OFF”.

For details on the Auto Calibration, see

“9: Calibrating the appropriate speaker

settings automatically (Auto Calibration)”

(page 40).

See “Before you perform Auto Calibration”

(page 40) before performing the Auto

Calibration.

To operate on the receiver

1Press GUI MODE repeatedly to select

“MENU OFF”.

2Press AMP.

Receiver operation is enabled.

3Press MENU.

4Press V/v repeatedly to select “<AUTO

CAL>” , then press .

5Press V/v repeatedly to select “A.CA L

START”, then press to start the

measurement.

Measurement starts in 5 seconds. A count

down is displayed.

Note

While the time is counting down, s tand away

from the measurement area to avoid

measurement error.

6Measurement starts.

The measurement proces s will take

approximately 30 seconds. Wait until the

measurement process completes.

To cancel Auto Calibration

The measurement will be canceled whe n you

do the following:

– Press ?/1, input buttons or MUTING.

– Press SPEAKERS on the receiver.

– Change the volume level.

– Connect the headphones.

Changing the display Performing Auto Calibration

Contents

Main To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. For customers in the United States and Canada For customers in the United States WARNING Owners Record Important Safety Instructions CAUTION About This Manual On copyrights About area codes About the S-AIR function Table of Contents Getting Started Playback Tuner Operations Enjoying Surround Sound S-AIR Operations Other Operations Using the Remote Additional Information Description and location of parts Front panel 9q;qaqsqdqfqgqh 68 4375 Page About the indicators on the display 12 4 5 687 9 qh qk qj q; 3 qa qg qf qsqd Page Rear panel AS-AIR (EZW-T100) BDMPORT CANTENNA section DDIGITAL INPUT/OUTPUT section ESPEAKERS section FAUDIO INPUT/OUTPUT section GVIDEO/AUDIO INPUT/OUTPUT section HCOMPONENT VIDEO INPUT/ OUTPUT section Remote commander 1 2 3 4 5 6 7 8 0 qs qd qf qg 9 wh ws qa Page Page 1: Installing speakers Example of a 5.1 channel speaker system configurat ion Example of a 7.1 channel speaker system configuration Getting Started Enjoying a 5.1/7.1 channel system Page 2: Connecting speakers Before connecting cords, be sure to disconnect the AC power cord (mains lead). L (10 mm) LRLR Page 3: Connecting the TV CD E COMPONENT VIDEO SURROUND SPEAKERS Page 4a: Connecting the audio components AAudio cord (not supplied) Connecting audio components Super Audio CD player, CD player, CD recorder DIGITAL MEDIA PORT adapter Notes on connecting DIGITAL MEDIA PORT adapter 4b: Connecting the video components Component to be connected If you want to connect several digital components, but cannot find an unused input Converting video signals How to connect your components Connecting components with HDMI jacks a)Connect at least one of the audio cords (B or C). AHDMI cable (not supplied) Sony recommends that you use an HDMI- authorized cable or Sony HDMI cable. BAudio cord (not supplied)a) COptical digital cord (not supplied)a) DVD player Audio/video Audio signals Notes on connecting cables Notes on HDMI connections All the digital audio jacks are c ompatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling Connecting a DVD player DVD player BOptical digital cord (not supplied) CCoaxial digital cord (not supplied) All the digital audio jacks are co mpatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling Connecting a Blu-ray disc player Blu-ray disc player DE CB CAudio cord (not supplied) DOptical digital cord (not supplied) ECoaxial digital cord (not supplied) Connecting a satellite tuner, set-top box BA Satellite tuner, Set-top box D COptical digital cord (not supplied) DAudio cord (not supplied) Connecting components with analog video and audio jack VIDEO 2 IN VIDEO L AUDIO R AUTO CAL MIC CAudio/video cord (not supplied) DVD reco rde r, VCR To the VIDEO 2 IN jacks (Front panel) Camcorder, video game C Function for conversion of video signals INPUT jack Input Signals Output Signals B A B A B C Notes on converting video signals To display Closed Caption To connect a recording component 5: Connecting the antennas (aeria ls) EZW-T100 *The shape of the connector varies depending on the area code of this receiver. FM wire antenna (aerial) (supplied) AM loop antenna (aerial) (supplied) 6: Preparing the receiver and the remote 1 2 Connecting the AC power cord (mains lead) Performing initial setup operations 7: Displaying the GUI menu on the TV screen 1 See 3: Connecting the TV (p age 21). 2 3 Inserting batteries into the remote 4 8: Selecting the f ront speaker system Press SPEAKERS repeatedly to select the front speaker system you want to drive. To turn off the speaker output To set up front speakers B 9: Calibrating the appropriate speaker settings automatically (Auto Calibration) Before you perform Auto Calibration 1 microphone to the AUTO CAL MIC jack. 2 microphone. On setting up the active subwoofer 3 4 5 6 7 To cancel the measurement 3 the measurement result. 4 the Auto Calibration Type, then Error Code 31, 32, 33 1 2 3 Message list after Auto Calibration measurement Guide to on-screen display operation MENU V/v/b, HOME MENU 8 9 10 Overview of the main menus other settings. To return to the previous screen 4 the menu item list is displayed. The option menu appears. 5 the option menu item you want, then press or b. 2 Input, then press or b. 3 the component you want, then 4 1 Input screen to select the input you want. 3 Name Input, then press . 4 2 Music or Video, then press or b. 3 4 the mode you want, then press . To operate the TDM-iP50 or TDM-NC1 using the GUI menu of the receiver 2 Selecting the operation screen Operating the component connected to the DIGITAL MEDIA PORT adapter Playback Contents list for audio Contents list for video To operate the TDM-iP50 using the iPod menu Listening to FM/AM radio Tuner Operations 2 3 4 In case of poor FM stereo reception 2 3 4 5 If you cannot tune in a station 1 2 3 Presetting FM/AM radio stations 2 7 8 1 2 1 Connecting the SIRIUS Satellite Radio SIRIUS jack M T D Preparing to listen to the SIRIUS Satellite Radio Checking the SIRIUS Radio ID 2 3 4 Selecting a channel of the SIRIUS Satellite Ra dio 2 SR, then press or b. 3 the category, then press or b. 2 3 4 5 6 Presetting SIRIUS Satellite Radio cha nnels 2 3 5 Selecting a channel by inputting the channel number directly (Direct Tuning) Presetting channels using the preset numbers 6 7 1 2 Restricting access to specific channels 4 5 SIRIUS Satellite Radio message list Playing back with 2-channel sound Press 2CH/A.DIRECT repeatedly to select the 2-channel sound mode of the sound output you want. Enjoying Surround Sound Types of 2CH mode Playing back with multi-channel surround Types of A.F.D. mode Press A.F.D. repeatedly to select the A.F.D. mode you want. If you connect a subwoofer 1 2 3 4 5 Types of enhanced surround mode Enjoying a surround effect for music/movie Press MUSIC or MOVIE repeatedly to select the surround effect you want for music or movie. Types of music/movie mode To turn off the sound field for movie/music Press 2CH/A.DIRECT or A.F.D. Digital audio formats supported by the receiver Resetting sound fields to the initial settings 1 2 press ?/1. Using the setting menu To return to the previous screen Press RETURN/EXIT O. Setting menu list Settings for the Auto Calibration (Auto Calibration menu) Auto Calibration menu parameter Setting for the speake r 3 (Speaker Settings menu) xSP Pattern (Speaker pattern) To select the speaker pattern 1 To adjust the distance from the seating position to each 1 2 2 3 To adjust the size of each 1 the speaker on the screen you want to adjust. 2 the value, then press . xTest Tone (Test tone) To output test tone from each When a test tone is not output from the speakers When a test tone is output from a different speaker tha n the speaker displayed on the TV screen xD.Range Comp (Dynamic range compression) xDistance Unit (Distance unit) Settings for the surround sound (Surround Settings menu) xS.F. Select (Sound field select) To select the surround sound field 1 2 Settings for the EQ (EQ menu) Audio Settings menu parameters To adjust the equalizer on the EQ screen 1 2 Settings for the video (Video Settings menu) xResolution (Converting video signals) Video Settings menu parameters In the video input/output conversion table classified by the menu settings xComp.Dec. (Component video decode r) Settings for HDMI HDMI Settings menu parameters (HDMI Settings menu) xCtrl for HDMI (Control for HDMI) xAudio Out (Setting HDMI audi o input) Settings for the S-AIR (S-AIR Settings menu) Using the menu in the display xS-AIR ID (S-AIR ID) xPairing (Pairing) 5 6 7 8 To return to the previous display Overview of the menus Page Page Page Changing the display Performing Auto Calibration Press DISPLAY repeatedly. All inputs except the FM and AM band FM and AM band SIRIUS Satellite Radio To confirm/save Auto Calibration when GUI function is turned off 1 When the measurement ends, a beep sounds and the measurement result appears on the display. xx xxx then press . Selecting a sound field type Listening to the sound without any adjustment (ANALOG DIRECT) Listening to the FM/AM radio Presetting radio stations Tuning radio stations 1 1 want to preset. 2 MEM. 3 Listening to satellite tuner 1 preset. 2 MEM. 3 Preparing for the BRAVIA Sync When your TV is compatible with the Control for HDMI-Easy Setting function 1 2 3 When your TV is not compatible with the Control for HDMI-Easy Setting function 1 2 3 4 Playing back components with one-touch operation (One-Touch Play) Play back a connected component. Watching a DVD/Blu-ray disc by simple operation Enjoying the TV sound from the speakers connected to the receiver Turning off the receiver with the TV (System Power Off) Press TV, then press AV ?/1. About S-AIR products S-AIR Operations To use S-AIR products (S-AIR main unit and sub unit) About environments where S-AIR products (S-AIR main unit and sub unit) are used S-AIR Operations Wireless transmitter Setting up an S-AIR product EZW-T100 EZW-T100 BI-A SUBWOOFER Establishing sound transmission between the S-AIR main unit and S-AIR sub unit (ID setting) 5 6 7 8 To set the ID of the S-AIR sub 1 you want to pair near the S-AIR main unit. 2 unit and the S-AIR sub unit. Pairing the S-AIR main unit with a specific S-AIR sub unit (Pairing operation) 3 4 5 6 Pairing, then press . Enjoying the systems sound in another room 1 to match the ID of the S-AIR main unit. 2 3 8 the S-AIR receiver. xWhen Party is set xWhen Separate is set 9 To control the system from the S-AIR receiver 4 RF Change, then press or b. When S-AIR reception is poor 5 6 Enjoying the S-AIR receiver while the S-AIR main unit is in standby mode 2 3 4 S-AIR Stby, then press . 5 Other Operations Switching between digital and analog audio (INPUT MODE) 1 Enjoying the sound/ images from other inputs 2 3 5 6 Page Using the Sleep Timer Changing the brightness of the front panel display (DIMMER) 1 2 3 4 Enjoying the surround effect at low volume levels (NIGHT MODE) Recording onto a CD-R Press NIGHT MODE. Recording using the receiver 1 SPEAKERS EZW-T100 SURROUND LR To set up speakers Operating each component using the remote 1 2 Table of buttons used to control each component Programming the remote 1 2 3 4 The numeric codes corresponding to the component and the maker of the component Using the Remote To control an MD deck To control a DVD recorder To control a DVD/VHS COMBO To control a DVD/HDD COMBO To control a TV To control an LD player To control a video CD player To control a VCR Using the Remote To control a satellite tuner To control a cable box Clearing all the contents of the remotes memory 1 VOL , press and hold ?/1, then press AV ?/1. The RM SET UP indicator flashes 3 times. 2 All the contents of the remotes memory (i.e., all the programmed data) are cleared. Glossary xCinema Studio EX xComponent video xComposite video xCrossover frequency xDolby Digital Plus xDolby Digital Surround EX xDolby Pro Logic II xDolby Pro Logic IIx xDolby Surround (Dolby Pro Logic) xDTS-HD xDTS Neo:6 xHDMI (High-Definition Multimedia Interface) xHigh Bitrate Audio xInterlace Precautions On safety On power sources On heat buildup On placement Troubleshooting Audio Page Page Video HDMI S-AIR function Page Tuner Remote commander Specifications AUDIO POWER SPECIFICATIONS (Models of area code U only) Error messages Reference sections for clearing the receivers memory FM tuner section AM tuner section Video section General Supplied accessories Index R S T U V