78US
Settings for the EQ

(EQ menu)

You can use the following param eters to adjust
the tonal quality (bass/trebel level) of front
speakers.
Notes
•This function does not work in the following cases.
– Sound Field is set to “Analog Direct”.
– PCM signals with a sampling frequency of more
than 96 kHz are being received.
– Dolby Tr ueHD signals w ith a samplin g
frequency of more than 96 kHz are being
received.
•If the equalizer is adjusted while the receiver is
receiving signals with a sampling frequency of
more than 96 kHz, the signals will always be
played back at 96 kHz.

To adjust the equalizer on the

EQ screen

1Press B/b repeatedly to select “Bass”
or “Treble”.
2Press V/v repeatedly to adjust the gain,
then press .
Settings for the audio

(Audio Settings menu)

You can make settings for the audio to suit
your preference.
xA/V Sync (Synchronizes audio
with video output)
Lets you delay the output of audio to minimize
the time gap between audio output and visual
display. You can adjust the delay from 0 ms to
300 ms in 10 ms steps.
Notes
•This parameter is useful when you use a large LCD
or plasma monitor or a projector.
•This paramet er is not valid when “Ana log Direct”
is being used.
xDual Mono (Digital broadcast
language selection)
Lets you select the language you want to listen
to during digital broadcast. This feature only
functions for Dolby Digital sources.
•Main/Sub
Sound of the main language will be output
through the front left speaker and sound of
the sub language will be output through the
front right speaker simultaneously.
•Main
Sound of the main language will be output.
•Sub
Sound of the sub language will be output.
Level
(dB)
Bass Treble
Frequency
(Hz)

Audio Settings menu parameters